[Sugar-devel] Building sugar Dextrose

[James Cameron]

On Fri, May 13, 2011 at 04:37:00PM +0200, Torello Querci wrote:
> I'm trying to compile dextrose to install on my XO1 (I follow this
> instruction: http://wiki.sugarlabs.org/go/Dextrose/Building).
> The compilation stage works fine and after long time I get the imags.
> I put the .img and img.crc files on a stick.
> 
> After image installation on my XO using copy-nand I start sugar with
> boot command from open firmware and this came up normally.
> 
> Unfortunally next boot I get a generic "boot failed" and after 30
> seconds the XO power down. During this step I not able to access
> openfirmare and to resume the device I need reflash from a signed image
> pressing the four direction keys at boot time.

What you describe will happen if you have not used disable-security
after installing a developer key.  disable-security must be used twice
the first time.  Can you please verify that you have used
disable-security properly?

-- 
James Cameron
http://quozl.linux.org.au/