[Sugar-devel] Building sugar Dextrose

[Torello Querci]

Il giorno lun, 16/05/2011 alle 17.19 +1000, James Cameron ha scritto:
> On Fri, May 13, 2011 at 04:37:00PM +0200, Torello Querci wrote:
> > I'm trying to compile dextrose to install on my XO1 (I follow this
> > instruction: http://wiki.sugarlabs.org/go/Dextrose/Building).
> > The compilation stage works fine and after long time I get the imags.
> > I put the .img and img.crc files on a stick.
> > 
> > After image installation on my XO using copy-nand I start sugar with
> > boot command from open firmware and this came up normally.
> > 
> > Unfortunally next boot I get a generic "boot failed" and after 30
> > seconds the XO power down. During this step I not able to access
> > openfirmare and to resume the device I need reflash from a signed image
> > pressing the four direction keys at boot time.
> 
> What you describe will happen if you have not used disable-security
> after installing a developer key.  disable-security must be used twice
> the first time.  Can you please verify that you have used
> disable-security properly?
> 

Ops .... right. I see your answer only after my reply. Sorry and Thanks
Again.


Best Regards, Torello Querci