<div dir="ltr">Sure<div><br></div><div><div>bash-4.2# dmesg </div><div>[ 0.000000] Initializing cgroup subsys cpu</div><div>[ 0.000000] Linux version 3.3.8_xo1.5-20140212.1212.olpc.e98f01a (root@localhost.localdomain) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 PREEMPT Wed Feb 12 12:22:19 EST 2014</div>
<div>[ 0.000000] OFW detected in memory, cif @ 0xff83ae48 (reserving top 8MB)</div><div>[ 0.000000] Reserving virtual address space above 0xff800000</div><div>[ 0.000000] BIOS-provided physical RAM map:</div><div>
[ 0.000000] BIOS-e801: 0000000000000000 - 000000000009f000 (usable)</div><div>[ 0.000000] BIOS-e801: 0000000000100000 - 000000003b69a800 (usable)</div><div>[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!</div>
<div>[ 0.000000] DMI 2.1 present.</div><div>[ 0.000000] DMI: OLPC XO/XO, BIOS OLPC Ver 1.00.15 07/11/2013</div><div>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)</div>
<div>[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)</div><div>[ 0.000000] last_pfn = 0x3b69a max_arch_pfn = 0x100000</div><div>[ 0.000000] initial memory mapped : 0 - 01000000</div><div>
[ 0.000000] Base memory trampoline at [b009c000] 9c000 size 12288</div><div>[ 0.000000] init_memory_mapping: 0000000000000000-000000003b69a000</div><div>[ 0.000000] 0000000000 - 0000400000 page 4k</div><div>[ 0.000000] 0000400000 - 003b400000 page 2M</div>
<div>[ 0.000000] 003b400000 - 003b69a000 page 4k</div><div>[ 0.000000] kernel direct mapping tables up to 3b69a000 @ ffb000-1000000</div><div>[ 0.000000] RAMDISK: 3b69aa00 - 3bdfd000</div><div>[ 0.000000] Allocated new RAMDISK: 3af37000 - 3b699600</div>
<div>[ 0.000000] Move RAMDISK from 000000003b69aa00 - 000000003bdfcfff to 3af37000 - 3b6995ff</div><div>[ 0.000000] ACPI: RSDP 000e0000 00024 (v02 OLPC )</div><div>[ 0.000000] ACPI: RSDT 000e0040 00034 (v01 OLPC OLPC_000 30303030 OLPC 30303030)</div>
<div>[ 0.000000] ACPI: FACP 000e0080 00084 (v02 OLPC OLPC_000 30303030 OLPC 30303030)</div><div>[ 0.000000] ACPI: DSDT 000fc000 023CE (v01 OLPC XO-1.5 00000001 INTL 20061109)</div><div>[ 0.000000] ACPI: FACS 000e0180 00040</div>
<div>[ 0.000000] ACPI: DSDT 000fc000 023CE (v01 OLPC XO-1.5 00000001 INTL 20061109)</div><div>[ 0.000000] ACPI: APIC 000e0200 0005A (v01 OLPC OLPC_000 30303030 OLPC 30303030)</div><div>[ 0.000000] ACPI: HPET 000e0280 00038 (v01 OLPC OLPC_000 30303030 OLPC 30303030)</div>
<div>[ 0.000000] ACPI: Local APIC address 0xfee00000</div><div>[ 0.000000] 950MB LOWMEM available.</div><div>[ 0.000000] mapped low ram: 0 - 3b69a000</div><div>[ 0.000000] low ram: 0 - 3b69a000</div><div>[ 0.000000] PROM DT: Built device tree with 49152 bytes of memory.</div>
<div>[ 0.000000] Zone PFN ranges:</div><div>[ 0.000000] DMA 0x00000010 -> 0x00001000</div><div>[ 0.000000] Normal 0x00001000 -> 0x0003b69a</div><div>[ 0.000000] Movable zone start PFN for each node</div>
<div>[ 0.000000] Early memory PFN ranges</div><div>[ 0.000000] 0: 0x00000010 -> 0x0000009f</div><div>[ 0.000000] 0: 0x00000100 -> 0x0003b69a</div><div>[ 0.000000] On node 0 totalpages: 243241</div>
<div>[ 0.000000] free_area_init_node: node 0, pgdat b08a6ec4, node_mem_map ea7bb200</div><div>[ 0.000000] DMA zone: 32 pages used for memmap</div><div>[ 0.000000] DMA zone: 0 pages reserved</div><div>[ 0.000000] DMA zone: 3951 pages, LIFO batch:0</div>
<div>[ 0.000000] Normal zone: 1870 pages used for memmap</div><div>[ 0.000000] Normal zone: 237388 pages, LIFO batch:31</div><div>[ 0.000000] Using APIC driver default</div><div>[ 0.000000] ACPI: PM-Timer IO Port: 0x408</div>
<div>[ 0.000000] ACPI: Local APIC address 0xfee00000</div><div>[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)</div><div>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])</div><div>[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])</div>
<div>[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23</div><div>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)</div><div>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)</div>
<div>[ 0.000000] ACPI: IRQ0 used by override.</div><div>[ 0.000000] ACPI: IRQ2 used by override.</div><div>[ 0.000000] ACPI: IRQ9 used by override.</div><div>[ 0.000000] ACPI: IRQ10 used by override.</div><div>
[ 0.000000] Using ACPI (MADT) for SMP configuration information</div><div>[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000</div><div>[ 0.000000] nr_irqs_gsi: 40</div><div>[ 0.000000] Allocating PCI resources starting at 3b69a800 (gap: 3b69a800:c4965800)</div>
<div>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768</div><div>[ 0.000000] pcpu-alloc: [0] 0 </div><div>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 241339</div><div>
[ 0.000000] Kernel command line: console=ttyS0,115200 console=tty0 fbcon=font:SUN12x22 no_console_suspend selinux=0 </div><div>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)</div><div>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)</div>
<div>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)</div><div>[ 0.000000] Initializing CPU#0</div><div>[ 0.000000] Memory: 950964k/973416k available (3358k kernel code, 22000k reserved, 1434k data, 424k init, 0k highmem)</div>
<div>[ 0.000000] virtual kernel memory layout:</div><div>[ 0.000000] fixmap : 0xff7a3000 - 0xff7ff000 ( 368 kB)</div><div>[ 0.000000] vmalloc : 0xebe9a000 - 0xff7a1000 ( 313 MB)</div><div>[ 0.000000] lowmem : 0xb0000000 - 0xeb69a000 ( 950 MB)</div>
<div>[ 0.000000] .init : 0xb08af000 - 0xb0919000 ( 424 kB)</div><div>[ 0.000000] .data : 0xb0747a5d - 0xb08ae2c0 (1434 kB)</div><div>[ 0.000000] .text : 0xb0400000 - 0xb0747a5d (3358 kB)</div>
<div>[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.</div><div>[ 0.000000] NR_IRQS:2304 nr_irqs:256 16</div><div>[ 0.000000] CPU 0 irqstacks, hard=ea008000 soft=ea00a000</div>
<div>[ 0.000000] Console: colour dummy device 80x25</div><div>[ 0.000000] console [tty0] enabled</div><div>[ 0.000000] console [ttyS0] enabled</div><div>[ 0.000000] ODEBUG: 5 of 5 active objects replaced</div>
<div>[ 0.000000] ODEBUG: selftest passed</div><div>[ 0.000000] hpet clockevent registered</div><div>[ 0.000000] Fast TSC calibration using PIT</div><div>[ 0.000000] Detected 997.453 MHz processor.</div><div>[ 0.010004] Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.90 BogoMIPS (lpj=9974530)</div>
<div>[ 0.022819] pid_max: default: 4096 minimum: 301</div><div>[ 0.030221] Security Framework initialized</div><div>[ 0.034414] Mount-cache hash table entries: 512</div><div>[ 0.043468] CPU: Centaur VIA C7-M Processor 1000MHz stepping 00</div>
<div>[ 0.050088] ACPI: Core revision 20120111</div><div>[ 0.063687] ftrace: allocating 18035 entries in 36 pages</div><div>[ 0.100159] Performance Events: </div><div>[ 0.110137] Enabling APIC mode: Flat. Using 1 I/O APICs</div>
<div>[ 0.116257] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1</div><div>[ 0.230397] devtmpfs: initialized</div><div>[ 0.234329] NET: Registered protocol family 16</div><div>[ 0.240020] OLPC board revision D5 (EC=60)</div>
<div>[ 0.244513] ACPI: bus type pci registered</div><div>[ 0.250885] PCI: Using configuration type 1 for base access</div><div>[ 0.260780] bio: create slab <bio-0> at 0</div><div>[ 0.265113] ACPI: Added _OSI(Module Device)</div>
<div>[ 0.269316] ACPI: Added _OSI(Processor Device)</div><div>[ 0.270021] ACPI: Added _OSI(3.0 _SCP Extensions)</div><div>[ 0.274744] ACPI: Added _OSI(Processor Aggregator Device)</div><div>[ 0.283369] ACPI: EC: Look up EC in DSDT</div>
<div>[ 0.299442] ACPI: Interpreter enabled</div><div>[ 0.300019] ACPI: (supports S0 S3 S5)</div><div>[ 0.303831] ACPI: Using IOAPIC for interrupt routing</div><div>[ 0.344357] ACPI: No dock devices found.</div>
<div>[ 0.348315] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug</div><div>[ 0.350358] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])</div><div>[ 0.360475] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]</div>
<div>[ 0.370009] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]</div><div>[ 0.376649] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]</div><div>[ 0.380008] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]</div>
<div>[ 0.390008] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]</div><div>[ 0.397340] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffe80000]</div><div>[ 0.400012] pci_root PNP0A03:00: host bridge window expanded to [mem 0x40000000-0xffe80000]; [mem 0x40000000-0xffe80000] ignored</div>
<div>[ 0.410182] PCI host bridge to bus 0000:00</div><div>[ 0.420009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]</div><div>[ 0.426211] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]</div><div>
[ 0.430008] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]</div><div>[ 0.440007] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]</div><div>[ 0.446898] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffe80000]</div>
<div>[ 0.450054] pci 0000:00:00.0: [1106:0409] type 0 class 0x000600</div><div>[ 0.450170] pci 0000:00:00.1: [1106:1409] type 0 class 0x000600</div><div>[ 0.450271] pci 0000:00:00.2: [1106:2409] type 0 class 0x000600</div>
<div>[ 0.450374] pci 0000:00:00.3: [1106:3409] type 0 class 0x000600</div><div>[ 0.450475] pci 0000:00:00.4: [1106:4409] type 0 class 0x000600</div><div>[ 0.450577] pci 0000:00:00.5: [1106:5409] type 0 class 0x000800</div>
<div>[ 0.450715] pci 0000:00:00.6: [1106:6409] type 0 class 0x000600</div><div>[ 0.450818] pci 0000:00:00.7: [1106:7409] type 0 class 0x000600</div><div>[ 0.450918] pci 0000:00:01.0: [1106:5122] type 0 class 0x000300</div>
<div>[ 0.450953] pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xd3ffffff pref]</div><div>[ 0.450977] pci 0000:00:01.0: reg 14: [mem 0xf0000000-0xf0ffffff]</div><div>[ 0.451038] pci 0000:00:01.0: reg 30: [mem 0x00000000-0x0000ffff pref]</div>
<div>[ 0.451078] pci 0000:00:01.0: supports D1 D2</div><div>[ 0.451144] pci 0000:00:0c.0: [1106:95d0] type 0 class 0x000805</div><div>[ 0.451178] pci 0000:00:0c.0: reg 10: [mem 0x80000000-0x800000ff]</div><div>[ 0.451202] pci 0000:00:0c.0: reg 14: [mem 0x80001000-0x800010ff]</div>
<div>[ 0.451226] pci 0000:00:0c.0: reg 18: [mem 0x80002000-0x800020ff]</div><div>[ 0.451308] pci 0000:00:0c.0: supports D1 D2</div><div>[ 0.451320] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold</div>
<div>[ 0.451374] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03</div><div>[ 0.451452] pci 0000:00:10.0: reg 20: [io 0x8000-0x801f]</div><div>[ 0.451511] pci 0000:00:10.0: supports D1 D2</div><div>[ 0.451523] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold</div>
<div>[ 0.451574] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03</div><div>[ 0.451652] pci 0000:00:10.1: reg 20: [io 0x8020-0x803f]</div><div>[ 0.451712] pci 0000:00:10.1: supports D1 D2</div><div>[ 0.451723] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold</div>
<div>[ 0.451772] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03</div><div>[ 0.451851] pci 0000:00:10.2: reg 20: [io 0x8040-0x805f]</div><div>[ 0.451910] pci 0000:00:10.2: supports D1 D2</div><div>[ 0.451921] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold</div>
<div>[ 0.451979] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03</div><div>[ 0.452017] pci 0000:00:10.4: reg 10: [mem 0x80003000-0x800030ff]</div><div>[ 0.452127] pci 0000:00:10.4: supports D1 D2</div><div>[ 0.452138] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold</div>
<div>[ 0.452192] pci 0000:00:11.0: [1106:8409] type 0 class 0x000601</div><div>[ 0.452364] pci 0000:00:11.7: [1106:a353] type 0 class 0x000600</div><div>[ 0.452463] pci 0000:00:13.0: [1106:b353] type 1 class 0x000604</div>
<div>[ 0.452586] pci 0000:00:14.0: [1106:3288] type 0 class 0x000403</div><div>[ 0.452619] pci 0000:00:14.0: reg 10: [mem 0x80004000-0x80007fff 64bit]</div><div>[ 0.452716] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold</div>
<div>[ 0.452855] pci 0000:00:13.0: PCI bridge to [bus 01-01]</div><div>[ 0.460029] pci_bus 0000:00: on NUMA node 0</div><div>[ 0.460047] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]</div><div>[ 0.460749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]</div>
<div>[ 0.461125] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)</div><div>[ 0.500285] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)</div><div>[ 0.507867] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *9</div>
<div>[ 0.513232] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)</div><div>[ 0.523028] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)</div><div>[ 0.530806] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.</div>
<div>[ 0.539554] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.</div><div>[ 0.544210] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.</div><div>[ 0.554201] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.</div>
<div>[ 0.564556] SCSI subsystem initialized</div><div>[ 0.570098] usbcore: registered new interface driver usbfs</div><div>[ 0.575656] usbcore: registered new interface driver hub</div><div>[ 0.580129] usbcore: registered new device driver usb</div>
<div>[ 0.585500] Advanced Linux Sound Architecture Driver Version 1.0.24.</div><div>[ 0.590016] PCI: Using ACPI for IRQ routing</div><div>[ 0.594222] PCI: pci_cache_line_size set to 64 bytes</div><div>[ 0.594410] reserve RAM buffer: 000000000009f000 - 000000000009ffff </div>
<div>[ 0.594423] reserve RAM buffer: 000000003b69a800 - 000000003bffffff </div><div>[ 0.595299] Switching to clocksource hpet</div><div>[ 0.600037] cfg80211: Calling CRDA to update world regulatory domain</div><div>
[ 0.610445] pnp: PnP ACPI init</div><div>[ 0.613570] ACPI: bus type pnp registered</div><div>[ 0.618015] pnp 00:00: [bus 00-ff]</div><div>[ 0.618027] pnp 00:00: [io 0x0cf8-0x0cff]</div><div>[ 0.618039] pnp 00:00: [io 0x0000-0x0cf7 window]</div>
<div>[ 0.618051] pnp 00:00: [io 0x0d00-0xffff window]</div><div>[ 0.618063] pnp 00:00: [mem 0x000a0000-0x000bffff window]</div><div>[ 0.618076] pnp 00:00: [mem 0x000c0000-0x000dffff window]</div><div>[ 0.618089] pnp 00:00: [mem 0xfed40000-0xfed44fff window]</div>
<div>[ 0.618102] pnp 00:00: [mem 0x40000000-0xffe80000 window]</div><div>[ 0.618279] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)</div><div>[ 0.618704] pnp 00:01: [mem 0xe0000000-0xefffffff]</div><div>
[ 0.618896] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved</div><div>[ 0.625582] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)</div><div>[ 0.625654] pnp 00:02: [mem 0xfee00000-0xfee00fff]</div>
<div>[ 0.625666] pnp 00:02: [mem 0xfec00000-0xfec00fff]</div><div>[ 0.625821] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved</div><div>[ 0.632476] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved</div>
<div>[ 0.639462] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)</div><div>[ 0.639541] pnp 00:03: [irq 12]</div><div>[ 0.639666] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)</div><div>
[ 0.639723] pnp 00:04: [io 0x0060]</div><div>[ 0.639733] pnp 00:04: [io 0x0064]</div><div>[ 0.639749] pnp 00:04: [irq 1]</div><div>[ 0.639888] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)</div>
<div>[ 0.639943] pnp 00:05: [io 0x0000-0x000f]</div><div>[ 0.639954] pnp 00:05: [io 0x0081-0x0083]</div><div>[ 0.639964] pnp 00:05: [io 0x0087]</div><div>[ 0.639974] pnp 00:05: [io 0x0089-0x008b]</div><div>
[ 0.639985] pnp 00:05: [io 0x008f]</div><div>[ 0.639995] pnp 00:05: [io 0x00c0-0x00df]</div><div>[ 0.640023] pnp 00:05: [dma 4]</div><div>[ 0.640124] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)</div>
<div>[ 0.640174] pnp 00:06: [io 0x0070-0x0071]</div><div>[ 0.640185] pnp 00:06: [io 0x0074-0x0075]</div><div>[ 0.640202] pnp 00:06: [irq 8]</div><div>[ 0.640308] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)</div>
<div>[ 0.640377] pnp 00:07: [io 0x00f0]</div><div>[ 0.640393] pnp 00:07: [irq 13]</div><div>[ 0.640514] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)</div><div>[ 0.640572] pnp 00:08: [io 0x0061]</div>
<div>[ 0.640680] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)</div><div>[ 0.650548] pnp 00:09: [mem 0xfed00000-0xfed003ff]</div><div>[ 0.650692] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)</div>
<div>[ 0.651345] pnp 00:0a: [io 0x0010-0x001f]</div><div>[ 0.651356] pnp 00:0a: [io 0x0022-0x003f]</div><div>[ 0.651367] pnp 00:0a: [io 0x0044-0x005f]</div><div>[ 0.651378] pnp 00:0a: [io 0x0062-0x0063]</div>
<div>[ 0.651388] pnp 00:0a: [io 0x0065-0x006f]</div><div>[ 0.651399] pnp 00:0a: [io 0x0072-0x0073]</div><div>[ 0.651410] pnp 00:0a: [io 0x0076-0x007e]</div><div>[ 0.651420] pnp 00:0a: [io 0x0080]</div><div>
[ 0.651430] pnp 00:0a: [io 0x0084-0x0086]</div><div>[ 0.651440] pnp 00:0a: [io 0x0088]</div><div>[ 0.651451] pnp 00:0a: [io 0x008c-0x008e]</div><div>[ 0.651461] pnp 00:0a: [io 0x0090-0x0091]</div><div>[ 0.651472] pnp 00:0a: [io 0x0092]</div>
<div>[ 0.651482] pnp 00:0a: [io 0x0093-0x009e]</div><div>[ 0.651493] pnp 00:0a: [io 0x00a2-0x00bf]</div><div>[ 0.651503] pnp 00:0a: [io 0x00e0-0x00ef]</div><div>[ 0.651514] pnp 00:0a: [io 0x0380-0x0387]</div>
<div>[ 0.651525] pnp 00:0a: [io 0x03e0-0x03e7]</div><div>[ 0.651536] pnp 00:0a: [io 0x03f8-0x03ff]</div><div>[ 0.651546] pnp 00:0a: [io 0x04d0-0x04d1]</div><div>[ 0.651557] pnp 00:0a: [io 0x0400-0x047f]</div>
<div>[ 0.651568] pnp 00:0a: [io 0x0500-0x050f]</div><div>[ 0.651579] pnp 00:0a: [mem 0xfed30000-0xfed300ff]</div><div>[ 0.651591] pnp 00:0a: [mem 0xfed30000-0xfed30fff]</div><div>[ 0.651821] system 00:0a: [io 0x0380-0x0387] has been reserved</div>
<div>[ 0.657775] system 00:0a: [io 0x03e0-0x03e7] has been reserved</div><div>[ 0.663744] system 00:0a: [io 0x03f8-0x03ff] has been reserved</div><div>[ 0.669686] system 00:0a: [io 0x04d0-0x04d1] has been reserved</div>
<div>[ 0.675640] system 00:0a: [io 0x0400-0x047f] has been reserved</div><div>[ 0.681594] system 00:0a: [io 0x0500-0x050f] has been reserved</div><div>[ 0.687539] system 00:0a: [mem 0xfed30000-0xfed300ff] has been reserved</div>
<div>[ 0.694190] system 00:0a: [mem 0xfed30000-0xfed30fff] could not be reserved</div><div>[ 0.701194] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)</div><div>[ 0.701923] pnp 00:0b: [mem 0x00000000-0x0009ffff]</div>
<div>[ 0.701937] pnp 00:0b: [mem 0x00000000-0xffffffff disabled]</div><div>[ 0.701949] pnp 00:0b: [mem 0x000e0000-0x000fffff]</div><div>[ 0.701960] pnp 00:0b: [mem 0x00100000-0x3bffffff]</div><div>[ 0.702170] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved</div>
<div>[ 0.709159] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved</div><div>[ 0.716165] system 00:0b: [mem 0x00100000-0x3bffffff] could not be reserved</div><div>[ 0.723162] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)</div>
<div>[ 0.723196] pnp: PnP ACPI: found 12 devices</div><div>[ 0.727399] ACPI: ACPI bus type pnp unregistered</div><div>[ 0.772709] PCI: max bus depth: 1 pci_try_num: 2</div><div>[ 0.772763] pci 0000:00:01.0: BAR 6: assigned [mem 0x40000000-0x4000ffff pref]</div>
<div>[ 0.780040] pci 0000:00:13.0: PCI bridge to [bus 01-01]</div><div>[ 0.785318] pci 0000:00:13.0: setting latency timer to 64</div><div>[ 0.785334] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]</div><div>[ 0.785346] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]</div>
<div>[ 0.785359] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]</div><div>[ 0.785372] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]</div><div>[ 0.785386] pci_bus 0000:00: resource 8 [mem 0x40000000-0xffe80000]</div>
<div>[ 0.785595] NET: Registered protocol family 2</div><div>[ 0.790142] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)</div><div>[ 0.797967] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)</div>
<div>[ 0.808121] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)</div><div>[ 0.817235] TCP: Hash tables configured (established 131072 bind 65536)</div><div>[ 0.823900] TCP reno registered</div><div>
[ 0.827304] NET: Registered protocol family 1</div><div>[ 0.831776] pci 0000:00:01.0: Boot video device</div><div>[ 0.831996] PCI: CLS mismatch (32 != 64), using 64 bytes</div><div>[ 0.832019] pci 0000:00:13.0: disabling DAC on VIA PCI bridge</div>
<div>[ 0.837974] Trying to unpack rootfs image as initramfs...</div><div>[ 0.900925] Freeing initrd memory: 7564k freed</div><div>[ 0.919375] olpc-xo15-sci XO15EC:00: Initialized, GPE = 0x1</div><div>[ 1.039554] HugeTLB registered 4 MB page size, pre-allocated 0 pages</div>
<div>[ 1.046319] VFS: Disk quotas dquot_6.5.2</div><div>[ 1.050327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)</div><div>[ 1.057580] msgmni has been set to 1872</div><div>[ 1.061776] cryptomgr_test used greatest stack depth: 7700 bytes left</div>
<div>[ 1.068538] io scheduler noop registered</div><div>[ 1.072636] io scheduler cfq registered (default)</div><div>[ 1.077637] ioapic: probe of 0000:00:00.5 failed with error -22</div><div>[ 1.083781] VIA Graphics Integration Chipset framebuffer 2.4 initializing</div>
<div>[ 1.104018] gpiochip_add: registered GPIOs 250 to 255 on device: VIAFB onboard GPIO</div><div>[ 1.137749] Console: switching to colour frame buffer device 100x40</div><div>[ 1.166274] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0D:00/input/input0</div>
<div>[ 1.176097] ACPI: Lid Switch [LID]</div><div>[ 1.179981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1</div><div>[ 1.187908] ACPI: Power Button [PWRF]</div><div>[ 1.192080] Marking TSC unstable due to TSC halts in idle</div>
<div>[ 1.197869] ACPI: acpi_idle registered with cpuidle</div><div>[ 1.198265] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled</div><div>[ 1.500195] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A</div>
<div>[ 1.507491] Non-volatile memory driver v1.3</div><div>[ 1.512018] VIA RNG detected</div><div>[ 1.515191] Linux agpgart interface v0.103</div><div>[ 1.535592] brd: module loaded</div><div>[ 1.550429] vx855_gpio vx855_gpio: found VX855 GPIO controller</div>
<div>[ 1.567985] gpiochip_add: registered GPIOs 0 to 41 on device: VX855 South Bridge</div><div>[ 1.587400] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver</div><div>[ 1.605740] ehci_hcd 0000:00:10.4: EHCI Host Controller</div>
<div>[ 1.622614] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1</div><div>[ 1.641699] ehci_hcd 0000:00:10.4: debug port 1</div><div>[ 1.657630] ehci_hcd 0000:00:10.4: irq 23, io mem 0x80003000</div>
<div>[ 1.690037] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00</div><div>[ 1.707134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002</div><div>[ 1.725371] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1</div>
<div>[ 1.744023] usb usb1: Product: EHCI Host Controller</div><div>[ 1.760231] usb usb1: Manufacturer: Linux 3.3.8_xo1.5-20140212.1212.olpc.e98f01a ehci_hcd</div><div>[ 1.780015] usb usb1: SerialNumber: 0000:00:10.4</div>
<div>[ 1.796481] hub 1-0:1.0: USB hub found</div><div>[ 1.811511] hub 1-0:1.0: 6 ports detected</div><div>[ 1.826887] uhci_hcd: USB Universal Host Controller Interface driver</div><div>[ 1.844628] uhci_hcd 0000:00:10.0: UHCI Host Controller</div>
<div>[ 1.861016] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2</div><div>[ 1.879847] uhci_hcd 0000:00:10.0: irq 20, io base 0x00008000</div><div>[ 1.896981] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001</div>
<div>[ 1.915136] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1</div><div>[ 1.933677] usb usb2: Product: UHCI Host Controller</div><div>[ 1.949572] usb usb2: Manufacturer: Linux 3.3.8_xo1.5-20140212.1212.olpc.e98f01a uhci_hcd</div>
<div>[ 1.969019] usb usb2: SerialNumber: 0000:00:10.0</div><div>[ 1.984997] hub 2-0:1.0: USB hub found</div><div>[ 1.999356] hub 2-0:1.0: 2 ports detected</div><div>[ 2.014184] uhci_hcd 0000:00:10.1: UHCI Host Controller</div>
<div>[ 2.029936] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3</div><div>[ 2.047987] uhci_hcd 0000:00:10.1: irq 22, io base 0x00008020</div><div>[ 2.064258] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001</div>
<div>[ 2.081557] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1</div><div>[ 2.099261] usb usb3: Product: UHCI Host Controller</div><div>[ 2.114554] usb usb3: Manufacturer: Linux 3.3.8_xo1.5-20140212.1212.olpc.e98f01a uhci_hcd</div>
<div>[ 2.133547] usb usb3: SerialNumber: 0000:00:10.1</div><div>[ 2.149342] hub 3-0:1.0: USB hub found</div><div>[ 2.163843] hub 3-0:1.0: 2 ports detected</div><div>[ 2.178688] uhci_hcd 0000:00:10.2: UHCI Host Controller</div>
<div>[ 2.194414] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4</div><div>[ 2.212399] uhci_hcd 0000:00:10.2: irq 21, io base 0x00008040</div><div>[ 2.228640] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001</div>
<div>[ 2.245957] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1</div><div>[ 2.263729] usb usb4: Product: UHCI Host Controller</div><div>[ 2.279227] usb usb4: Manufacturer: Linux 3.3.8_xo1.5-20140212.1212.olpc.e98f01a uhci_hcd</div>
<div>[ 2.298455] usb usb4: SerialNumber: 0000:00:10.2</div><div>[ 2.314310] hub 4-0:1.0: USB hub found</div><div>[ 2.328803] hub 4-0:1.0: 2 ports detected</div><div>[ 2.343622] Initializing USB Mass Storage driver...</div>
<div>[ 2.359043] usbcore: registered new interface driver usb-storage</div><div>[ 2.375504] USB Mass Storage support registered.</div><div>[ 2.390649] usbcore: registered new interface driver libusual</div><div>[ 2.407166] usbcore: registered new interface driver usbserial</div>
<div>[ 2.423510] USB Serial support registered for generic</div><div>[ 2.439051] usbcore: registered new interface driver usbserial_generic</div><div>[ 2.456191] usbserial: USB Serial Driver core</div><div>[ 2.471191] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12</div>
<div>[ 2.515567] serio: i8042 KBD port at 0x60,0x64 irq 1</div><div>[ 2.531378] serio: i8042 AUX port at 0x60,0x64 irq 12</div><div>[ 2.547459] rtc_cmos 00:06: RTC can wake from S4</div><div>[ 2.562780] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0</div>
<div>[ 2.579238] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs</div><div>[ 2.596641] Linux video capture interface: v2.00</div><div>[ 2.642769] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2</div>
<div>[ 2.880756] hwmon_vid: Using 6-bit VID table for VIA C7-M CPU</div><div>[ 2.912789] cpuidle: using governor ladder</div><div>[ 2.952099] cpuidle: using governor menu</div><div>[ 2.973686] sdhci: Secure Digital Host Controller Interface driver</div>
<div>[ 3.011790] sdhci: Copyright(c) Pierre Ossman</div><div>[ 3.049995] sdhci-pci 0000:00:0c.0: SDHCI controller found [1106:95d0] (rev 10)</div><div>[ 3.078233] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div>
<div>[ 3.078269] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div><div>[ 3.078353] Registered led device: mmc0::</div><div>[ 3.078463] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div><div>[ 3.079570] mmc0: SDHCI controller on PCI [0000:00:0c.0] using DMA</div>
<div>[ 3.121676] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div><div>[ 3.121706] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div><div>[ 3.121792] Registered led device: mmc1::</div><div>[ 3.121875] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div>
<div>[ 3.122901] mmc1: SDHCI controller on PCI [0000:00:0c.0] using DMA</div><div>[ 3.165804] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div><div>[ 3.165832] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div>
<div>[ 3.165905] Registered led device: mmc2::</div><div>[ 3.165982] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div><div>[ 3.167008] mmc2: SDHCI controller on PCI [0000:00:0c.0] using DMA</div><div>[ 3.191892] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div>
<div>[ 3.213208] usbcore: registered new interface driver usbhid</div><div>[ 3.268417] usbhid: USB HID core driver</div><div>[ 3.282674] i2c-core: driver [olpc_dcon] using legacy suspend method</div><div>[ 3.311938] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div>
<div>[ 3.335036] i2c-core: driver [olpc_dcon] using legacy resume method</div><div>[ 3.373452] olpc-dcon: Discovered DCON version 2</div><div>[ 3.388581] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div>
<div>[ 3.421446] input: EBook Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/XO15EBK:00/input/input3</div><div>[ 3.453388] modprobe used greatest stack depth: 7064 bytes left</div><div>[ 3.473486] snd_hda_intel 0000:00:14.0: enabling device (0000 -> 0002)</div>
<div>[ 3.490973] sdhci-pci 0000:00:0c.0: setting latency timer to 64</div><div>[ 3.502125] snd_hda_intel 0000:00:14.0: PCI: Disallowing DAC for device</div><div>[ 3.568721] mmc1: new SDIO card at address 0001</div>
<div>[ 3.600235] ALSA device list:</div><div>[ 3.613948] #0: HDA VIA VT82xx at 0x80004000 irq 17</div><div>[ 3.631054] TCP bic registered</div><div>[ 3.644670] Initializing XFRM netlink socket</div><div>[ 3.659918] NET: Registered protocol family 10</div>
<div>[ 3.678679] Mobile IPv6</div><div>[ 3.691624] NET: Registered protocol family 17</div><div>[ 3.706546] lib80211: common routines for IEEE802.11 drivers</div><div>[ 3.722622] lib80211_crypt: registered algorithm 'NULL'</div>
<div>[ 3.722632] Registering the dns_resolver key type</div><div>[ 3.737603] Using IPI Shortcut mode</div><div>[ 3.755836] Freeing unused kernel memory: 424k freed</div><div>[ 3.772443] Write protecting the kernel text: 3360k</div>
<div>[ 3.787931] Write protecting the kernel read-only data: 1176k</div><div>[ 3.820291] mmc2: new high speed SDHC card at address bcc2</div><div>[ 3.839273] init used greatest stack depth: 6988 bytes left</div><div>
[ 3.855300] mmcblk0: mmc2:bcc2 SU04G 3.69 GiB </div><div>[ 3.874317] tmpfs: No value for mount option 'strictatime'</div><div>[ 3.890440] mount used greatest stack depth: 6880 bytes left</div><div>[ 3.915588] mmcblk0: p1 p2</div>
<div>[ 3.938941] tmpfs: No value for mount option 'strictatime'</div><div>[ 3.970313] mount used greatest stack depth: 6752 bytes left</div><div>[ 3.991489] tmpfs: No value for mount option 'strictatime'</div>
<div>[ 4.052810] dracut: dracut-18 (Spherical Cow) dracut-024-18.git20130102.fc18</div><div>[ 4.098936] systemd-udevd[66]: starting version 195</div><div>[ 4.127600] udevadm used greatest stack depth: 6632 bytes left</div>
<div>[ 5.818870] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem</div><div>[ 5.837100] EXT4-fs (mmcblk0p2): write access will be enabled during recovery</div><div>[ 5.957634] EXT4-fs (mmcblk0p2): recovery complete</div>
<div>[ 5.977347] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)</div><div>[ 6.018188] dracut: Remounting /dev/disk/mmc/mmc2p2 with -o </div><div>[ 6.036643] EXT4-fs (mmcblk0p2): re-mounted. Opts: user_xattr,barrier=1,data=ordered</div>
<div>[ 6.055839] init used greatest stack depth: 6604 bytes left</div><div>[ 6.091184] dracut: Mounted root filesystem /dev/disk/mmc/mmc2p2</div><div>[ 6.123244] EXT4-fs (mmcblk0p2): re-mounted. Opts: user_xattr,barrier=1,data=ordered</div>
<div>[ 6.149415] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended</div><div>[ 6.171807] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)</div><div>[ 6.247717] Dsize 7744512 Psize 7605248 Pstart 139264 Pend 7744512</div>
<div>[ 7.300442] plymouthd used greatest stack depth: 6312 bytes left</div><div>[ 7.703585] dcon_freeze_store: 0</div><div>[ 7.707095] dcon_source_switch to CPU</div><div>[ 7.751790] olpc-dcon: The CPU has control</div>
<div>[ 7.845836] dracut: Switching root</div><div>[ 8.522271] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)</div><div>[ 8.543465] systemd[1]: Set hostname to <xo-a7-32-6d.localdomain>.</div>
<div>[ 9.605502] systemd[1]: Started Replay Read-Ahead Data.</div><div>[ 9.610858] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.</div><div>[ 9.618884] systemd[1]: Started Forward Password Requests to Wall Directory Watch.</div>
<div>[ 9.626554] systemd[1]: Expecting device dev-ttyS0.device...</div><div>[ 9.632413] systemd[1]: Starting Remote File Systems.</div><div>[ 9.637607] systemd[1]: Reached target Remote File Systems.</div><div>[ 9.643265] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.</div>
<div>[ 9.650130] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.</div><div>[ 9.657133] systemd[1]: Starting Delayed Shutdown Socket.</div><div>[ 9.662781] systemd[1]: Listening on Delayed Shutdown Socket.</div>
<div>[ 9.668609] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.</div><div>[ 9.676842] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.</div><div>[ 9.685927] systemd[1]: Starting Paths.</div>
<div>[ 9.689953] systemd[1]: Reached target Paths.</div><div>[ 9.694432] systemd[1]: Starting udev Kernel Socket.</div><div>[ 9.699615] systemd[1]: Listening on udev Kernel Socket.</div><div>[ 9.705021] systemd[1]: Starting udev Control Socket.</div>
<div>[ 9.710342] systemd[1]: Listening on udev Control Socket.</div><div>[ 9.715798] systemd[1]: Starting Encrypted Volumes.</div><div>[ 9.720843] systemd[1]: Reached target Encrypted Volumes.</div><div>[ 9.726318] systemd[1]: Starting Journal Socket.</div>
<div>[ 9.731292] systemd[1]: Listening on Journal Socket.</div><div>[ 9.736343] systemd[1]: Starting udev Coldplug all Devices...</div><div>[ 9.758486] systemd[1]: Starting Apply Kernel Variables...</div><div>[ 9.765903] systemd[1]: Starting Setup Virtual Console...</div>
<div>[ 9.775452] systemd[1]: Mounting Debug File System...</div><div>[ 9.824449] systemd[1]: Started Load Kernel Modules.</div><div>[ 9.829578] systemd[1]: Mounted FUSE Control File System.</div><div>[ 9.889367] systemd[1]: Starting Create list of required static device nodes for the current kernel...</div>
<div>[ 9.901033] systemd[1]: Starting Journal Service...</div><div>[ 9.911159] systemd[1]: Started Journal Service.</div><div>[ 10.817387] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)</div><div>[ 11.052166] systemd-udevd[232]: starting version 208</div>
<div>[ 12.747405] Via camera: serial port is enabled, refusing to load.</div><div>[ 12.778865] libertas_sdio: Libertas SDIO driver</div><div>[ 12.806068] Specify override_serial=1 to force module loading.</div><div>
[ 12.859788] libertas_sdio: Copyright Pierre Ossman</div><div>[ 13.006488] viafb-camera: probe of viafb-camera failed with error -16</div><div>[ 13.069803] systemd-journald[206]: Received request to flush runtime journal from PID 1</div>
<div>[ 13.357450] psmouse serio1: synaptics: OLPC XO detected, not enabling Synaptics protocol.</div><div>[ 13.557124] usbcore: registered new interface driver sisusb</div><div>[ 13.679036] usbcore: registered new interface driver udlfb</div>
<div>[ 13.766159] usbcore: deregistering interface driver sisusb</div><div>[ 13.788618] usbcore: deregistering interface driver udlfb</div><div>[ 13.943543] runin-check: noop</div><div>[ 14.553320] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4</div>
<div>[ 14.598784] mousedev: PS/2 mouse device common for all mice</div><div>[ 14.848613] dcon_freeze_store: 1</div><div>[ 14.852368] dcon_source_switch to DCON</div><div>[ 14.857601] libertas_sdio mmc1:0001:1: (unregistered net_device): 00:17:c4:a7:32:6d, fw 9.70.20p0, cap 0x000003a3</div>
<div>[ 14.879904] libertas_sdio mmc1:0001:1: wlan0: Marvell WLAN 802.11 adapter</div><div>[ 14.893277] olpc-dcon: The DCON has control</div><div>[ 15.432974] input: olpc-kbdshim virtual keyboard as /devices/virtual/input/input5</div>
<div>[ 15.477577] input: olpc-kbdshim virtual mouse as /devices/virtual/input/input6</div><div>[ 16.064894] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04711/0x200000/0x0</div><div>[ 16.239130] input: SynRelPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7</div>
<div>[ 16.945560] systemd-udevd[244]: renamed network interface wlan0 to eth0</div><div>[ 18.203809] ip_tables: (C) 2000-2006 Netfilter Core Team</div><div>[ 22.015895] ADDRCONF(NETDEV_UP): eth0: link is not ready</div>
<div>[ 50.582600] dcon_freeze_store: 0</div><div>[ 50.585900] dcon_source_switch to CPU</div><div>[ 50.623341] olpc-dcon: The CPU has control</div></div><div><br></div></div><div class="gmail_extra"><br><br><div class="gmail_quote">
On Mon, May 12, 2014 at 11:21 AM, Daniel Narvaez <span dir="ltr"><<a href="mailto:dwnarvaez@gmail.com" target="_blank">dwnarvaez@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">I haven't really looked into this yet, but I wonder about this<div class=""><br><br><div>[ 32.849] [drm] failed to load kernel module "chrome"</div>
<div>[ 32.849] (EE) [drm] drmOpen failed.<br><br></div></div><div>Can you also post dmesg? I suppose it might have info about why loading the module failed.<br></div><br></div><div class="gmail_extra"><div><div class="h5">
<br><br><div class="gmail_quote">
On 12 May 2014 16:16, Gonzalo Odiard <span dir="ltr"><<a href="mailto:godiard@sugarlabs.org" target="_blank">godiard@sugarlabs.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr"><div>bash-4.2# cat /var/log/Xorg.0.log </div><div>[ 32.666] </div><div>X.Org X Server 1.14.4</div><div>Release Date: 2013-10-31</div><div>[ 32.666] X Protocol Version 11, Revision 0</div><div>[ 32.666] Build Operating System: 3.12.8-300.fc20.x86_64 </div>
<div>[ 32.666] Current Operating System: Linux xo-a7-32-6d.localdomain 3.3.8_xo1.5-20140212.1212.olpc.e98f01a #1 PREEMPT Wed Feb 12 12:22:19 EST 2014 i686</div><div>[ 32.666] Kernel command line: console=ttyS0,115200 console=tty0 fbcon=font:SUN12x22 no_console_suspend selinux=0 </div>
<div>[ 32.666] Build Date: 28 February 2014 03:35:45AM</div><div>[ 32.666] Build ID: xorg-x11-server 1.14.4-7.fc20 </div><div>[ 32.666] Current version of pixman: 0.30.0</div><div>[ 32.666] <span style="white-space:pre-wrap"> </span>Before reporting problems, check <a href="http://wiki.x.org" target="_blank">http://wiki.x.org</a></div>
<div><span style="white-space:pre-wrap"> </span>to make sure that you have the latest version.</div><div>[ 32.666] Markers: (--) probed, (**) from config file, (==) default setting,</div><div><span style="white-space:pre-wrap"> </span>(++) from command line, (!!) notice, (II) informational,</div>
<div><span style="white-space:pre-wrap"> </span>(WW) warning, (EE) error, (NI) not implemented, (??) unknown.</div><div>[ 32.666] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 12 14:23:38 2014</div>
<div>[ 32.667] (==) Using config directory: "/etc/X11/xorg.conf.d"</div><div>[ 32.667] (==) Using system config directory "/usr/share/X11/xorg.conf.d"</div><div>[ 32.668] (==) No Layout section. Using the first Screen section.</div>
<div>[ 32.668] (==) No screen section available. Using defaults.</div><div>[ 32.668] (**) |-->Screen "Default Screen Section" (0)</div><div>[ 32.668] (**) | |-->Monitor "<default monitor>"</div>
<div>[ 32.668] (==) No device specified for screen "Default Screen Section".</div><div><span style="white-space:pre-wrap"> </span>Using the first device section listed.</div><div>[ 32.668] (**) | |-->Device "Configured Video Device"</div>
<div>[ 32.668] (==) No monitor specified for screen "Default Screen Section".</div><div><span style="white-space:pre-wrap"> </span>Using a default monitor configuration.</div><div>[ 32.668] (**) Option "DontZap" "true"</div>
<div>[ 32.669] (**) Option "BlankTime" "0"</div><div>[ 32.669] (**) Option "StandbyTime" "0"</div><div>[ 32.669] (**) Option "SuspendTime" "0"</div><div>
[ 32.669] (**) Option "OffTime" "0"</div><div>[ 32.669] (==) Automatically adding devices</div><div>[ 32.669] (==) Automatically enabling devices</div><div>[ 32.669] (==) Automatically adding GPU devices</div>
<div>[ 32.669] (==) FontPath set to:</div><div><span style="white-space:pre-wrap"> </span>catalogue:/etc/X11/fontpath.d,</div><div><span style="white-space:pre-wrap"> </span>built-ins</div><div>[ 32.669] (==) ModulePath set to "/usr/lib/xorg/modules"</div>
<div>[ 32.669] (**) Extension "DPMS" is disabled</div><div>[ 32.669] (II) The server relies on udev to provide the list of input devices.</div><div><span style="white-space:pre-wrap"> </span>If no devices become available, reconfigure udev or disable AutoAddDevices.</div>
<div>[ 32.669] (II) Loader magic: 0x826b6a0</div><div>[ 32.669] (II) Module ABI versions:</div><div>[ 32.669] <span style="white-space:pre-wrap"> </span>X.Org ANSI C Emulation: 0.4</div><div>[ 32.669] <span style="white-space:pre-wrap"> </span>X.Org Video Driver: 14.1</div>
<div>[ 32.669] <span style="white-space:pre-wrap"> </span>X.Org XInput driver : 19.2</div><div>[ 32.669] <span style="white-space:pre-wrap"> </span>X.Org Server Extension : 7.0</div><div>[ 32.672] (--) PCI:*(0:0:1:0) 1106:5122:152d:0833 rev 0, Mem @ 0xd0000000/67108864, 0xf0000000/16777216, BIOS @ 0x????????/65536</div>
<div>[ 32.672] Initializing built-in extension Generic Event Extension</div><div>[ 32.672] Initializing built-in extension SHAPE</div><div>[ 32.672] Initializing built-in extension MIT-SHM</div><div>[ 32.672] Initializing built-in extension XInputExtension</div>
<div>[ 32.673] Initializing built-in extension XTEST</div><div>[ 32.673] Initializing built-in extension BIG-REQUESTS</div><div>[ 32.673] Initializing built-in extension SYNC</div><div>[ 32.673] Initializing built-in extension XKEYBOARD</div>
<div>[ 32.673] Initializing built-in extension XC-MISC</div><div>[ 32.673] Initializing built-in extension XINERAMA</div><div>[ 32.673] Initializing built-in extension XFIXES</div><div>[ 32.673] Initializing built-in extension RENDER</div>
<div>[ 32.673] Initializing built-in extension RANDR</div><div>[ 32.673] Initializing built-in extension COMPOSITE</div><div>[ 32.673] Initializing built-in extension DAMAGE</div><div>[ 32.673] Initializing built-in extension MIT-SCREEN-SAVER</div>
<div>[ 32.673] Initializing built-in extension DOUBLE-BUFFER</div><div>[ 32.673] Initializing built-in extension RECORD</div><div>[ 32.673] Initializing built-in extension DPMS</div><div>[ 32.673] Initializing built-in extension X-Resource</div>
<div>[ 32.673] Initializing built-in extension XVideo</div><div>[ 32.673] Initializing built-in extension XVideo-MotionCompensation</div><div>[ 32.673] Initializing built-in extension SELinux</div><div>[ 32.673] Initializing built-in extension XFree86-VidModeExtension</div>
<div>[ 32.673] Initializing built-in extension XFree86-DGA</div><div>[ 32.673] Initializing built-in extension XFree86-DRI</div><div>[ 32.673] Initializing built-in extension DRI2</div><div>[ 32.673] (II) LoadModule: "glx"</div>
<div>[ 32.674] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so</div><div>[ 32.674] (II) Module glx: vendor="X.Org Foundation"</div><div>[ 32.674] <span style="white-space:pre-wrap"> </span>compiled for 1.14.4, module version = 1.0.0</div>
<div>[ 32.674] <span style="white-space:pre-wrap"> </span>ABI class: X.Org Server Extension, version 7.0</div><div>[ 32.674] (==) AIGLX enabled</div><div>[ 32.674] Loading extension GLX</div><div>[ 32.674] (II) LoadModule: "chrome"</div>
<div>[ 32.675] (II) Loading /usr/lib/xorg/modules/drivers/chrome_drv.so</div><div>[ 32.676] (II) Module chrome: vendor="X.Org Foundation"</div><div>[ 32.676] <span style="white-space:pre-wrap"> </span>compiled for 1.14.4, module version = 5.74.255</div>
<div>[ 32.676] <span style="white-space:pre-wrap"> </span>Module class: X.Org Video Driver</div><div>[ 32.676] (II) chrome: driver for VIA chipsets: P4M800PRO, CX700, K8M890, P4M890,</div><div><span style="white-space:pre-wrap"> </span>P4M900, VX800, VX855, VX900, CN750</div>
<div>[ 32.676] (++) using VT number 1</div><div><br></div><div>[ 32.676] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support</div><div>[ 32.676] (II) Loading sub module "vgahw"</div><div>
[ 32.676] (II) LoadModule: "vgahw"</div><div>[ 32.677] (II) Loading /usr/lib/xorg/modules/libvgahw.so</div><div>[ 32.677] (II) Module vgahw: vendor="X.Org Foundation"</div><div>[ 32.677] <span style="white-space:pre-wrap"> </span>compiled for 1.14.4, module version = 0.1.0</div>
<div>[ 32.677] <span style="white-space:pre-wrap"> </span>ABI class: X.Org Video Driver, version 14.1</div><div>[ 32.677] (II) VIA(0): Detected kernel command queueing support</div><div>[ 32.677] (II) VIA(0): the driver module for this screen 0 is "chrome" driver.</div>
<div>[ 32.677] (--) VIA(0): Chipset: "VX855"</div><div>[ 32.677] (--) VIA(0): Chipset Rev.: 0</div><div>[ 32.677] (II) VIA(0): Creating default Display subsection in Screen section</div><div><span style="white-space:pre-wrap"> </span>"Default Screen Section" for depth/fbbpp 24/32</div>
<div>[ 32.677] (==) VIA(0): Depth 24, (--) framebuffer bpp 32</div><div>[ 32.677] (==) VIA(0): RGB weight 888</div><div>[ 32.677] (==) VIA(0): Default visual is TrueColor</div><div>[ 32.677] (II) Loading sub module "int10"</div>
<div>[ 32.678] (II) LoadModule: "int10"</div><div>[ 32.678] (II) Loading /usr/lib/xorg/modules/libint10.so</div><div>[ 32.678] (II) Module int10: vendor="X.Org Foundation"</div><div>[ 32.678] <span style="white-space:pre-wrap"> </span>compiled for 1.14.4, module version = 1.0.0</div>
<div>[ 32.678] <span style="white-space:pre-wrap"> </span>ABI class: X.Org Video Driver, version 14.1</div><div>[ 32.679] (EE) VIA(0): V_BIOS address 0x7bf60 out of range</div><div>[ 32.681] (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0</div>
<div>[ 32.681] (II) Loading sub module "vt1625"</div><div>[ 32.681] (II) LoadModule: "vt1625"</div><div>[ 32.681] (WW) Warning, couldn't open module vt1625</div><div>[ 32.681] (II) UnloadModule: "vt1625"</div>
<div>[ 32.682] (II) Unloading vt1625</div><div>[ 32.682] (II) Loading sub module "ViaIntegratedTV"</div><div>[ 32.682] (II) LoadModule: "ViaIntegratedTV"</div><div>[ 32.682] (WW) Warning, couldn't open module ViaIntegratedTV</div>
<div>[ 32.682] (II) UnloadModule: "ViaIntegratedTV"</div><div>[ 32.682] (II) Unloading ViaIntegratedTV</div><div>[ 32.682] (II) Loading sub module "ad9389"</div><div>[ 32.682] (II) LoadModule: "ad9389"</div>
<div>[ 32.683] (WW) Warning, couldn't open module ad9389</div><div>[ 32.683] (II) UnloadModule: "ad9389"</div><div>[ 32.683] (II) Unloading ad9389</div><div>[ 32.683] (II) Loading sub module "sil164"</div>
<div>[ 32.683] (II) LoadModule: "sil164"</div><div>[ 32.684] (WW) Warning, couldn't open module sil164</div><div>[ 32.684] (II) UnloadModule: "sil164"</div><div>[ 32.684] (II) Unloading sil164</div>
<div>[ 32.684] (==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)</div><div>[ 32.684] (--) VIA(0): videoram = 65536k</div><div>[ 32.684] (II) Loading sub module "i2c"</div><div>[ 32.684] (II) LoadModule: "i2c"</div>
<div>[ 32.684] (II) Module "i2c" already built-in</div><div>[ 32.684] (II) VIA(0): I2C bus "I2C bus 1" initialized.</div><div>[ 32.684] (II) VIA(0): I2C bus "I2C bus 2" initialized.</div>
<div>[ 32.684] (II) Loading sub module "fb"</div><div>[ 32.684] (II) LoadModule: "fb"</div><div>[ 32.684] (II) Loading /usr/lib/xorg/modules/libfb.so</div><div>[ 32.685] (II) Module fb: vendor="X.Org Foundation"</div>
<div>[ 32.685] <span style="white-space:pre-wrap"> </span>compiled for 1.14.4, module version = 1.0.0</div><div>[ 32.685] <span style="white-space:pre-wrap"> </span>ABI class: X.Org ANSI C Emulation, version 0.4</div>
<div>[ 32.685] (II) Loading sub module "exa"</div><div>[ 32.685] (II) LoadModule: "exa"</div><div>[ 32.685] (II) Loading /usr/lib/xorg/modules/libexa.so</div><div>[ 32.686] (II) Module exa: vendor="X.Org Foundation"</div>
<div>[ 32.686] <span style="white-space:pre-wrap"> </span>compiled for 1.14.4, module version = 2.6.0</div><div>[ 32.686] <span style="white-space:pre-wrap"> </span>ABI class: X.Org Video Driver, version 14.1</div>
<div>[ 32.686] (II) Loading sub module "ramdac"</div><div>[ 32.686] (II) LoadModule: "ramdac"</div><div>[ 32.686] (II) Module "ramdac" already built-in</div><div>[ 32.686] (II) Loading sub module "ddc"</div>
<div>[ 32.686] (II) LoadModule: "ddc"</div><div>[ 32.686] (II) Module "ddc" already built-in</div><div>[ 32.686] (II) VIA(0): Output CRT has no monitor section</div><div>[ 32.686] (II) VIA(0): Output DVI has no monitor section</div>
<div>[ 32.686] (II) VIA(0): Output LCD using monitor section LCD</div><div>[ 32.686] (**) VIA(0): Option "DIPort" "DFP_HIGHLOW,DVP1"</div><div>[ 32.686] (**) VIA(0): Option "PanelSize" "1200x900"</div>
<div>[ 32.686] (II) VIA(0): Output TV has no monitor section</div><div>[ 32.686] (II) VIA(0): Output HDMI has no monitor section</div><div>[ 32.686] (II) VIA(0): Output DP has no monitor section</div><div>[ 32.686] (II) VIA(0): Output DP-2 has no monitor section</div>
<div>[ 32.686] (II) VIA(0): Output LCD-2 has no monitor section</div><div>[ 32.686] (II) VIA(0): Output CRT-2 has no monitor section</div><div>[ 32.703] (II) VIA(0): EDID for output CRT</div><div>[ 32.704] (II) VIA(0): Printing probed modes for output LCD</div>
<div>[ 32.704] (II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz P)</div><div>[ 32.704] (II) VIA(0): Output CRT disconnected</div><div>[ 32.704] (II) VIA(0): Output LCD connected</div>
<div>[ 32.704] (II) VIA(0): Using exact sizes for initial modes</div><div>[ 32.704] (II) VIA(0): Output LCD using initial mode 1200x900 +0+0</div><div>[ 32.704] (II) VIA(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.</div>
<div>[ 32.704] (==) VIA(0): DPI set to (96, 96)</div><div>[ 32.704] (--) Depth 24 pixmap format is 32 bpp</div><div>[ 32.716] (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0</div><div>[ 32.716] (II) VIA(0): [drm] Detect H6 chipset: 0007 chipid: 5122</div>
<div>[ 32.806] (EE) VIA(0): DRM open error </div><div>[ 32.807] drmOpenDevice: node name is /dev/dri/card0</div><div>[ 32.812] drmOpenDevice: node name is /dev/dri/card0</div><div>[ 32.849] [drm] failed to load kernel module "chrome"</div>
<div>[ 32.849] (EE) [drm] drmOpen failed.</div><div>[ 32.849] (EE) VIA(0): [dri] DRIScreenInit failed. Disabling DRI.</div><div>[ 32.853] (II) VIA(0): H6 3D Engine has been initialized.</div><div>[ 32.853] (II) VIA(0): VIAInternalScreenInit</div>
<div>[ 32.854] DEBUG: maxPitchBytes 16383</div><div>[ 32.854] (II) EXA(0): Offscreen pixmap area of 60005344 bytes</div><div>[ 32.854] (II) EXA(0): Driver registered support for the following operations:</div><div>
[ 32.854] (II) Solid</div><div>[ 32.854] (II) Copy</div><div>[ 32.854] (II) Composite (RENDER acceleration)</div><div>[ 32.854] (II) VIA(0): Enable EXA Now</div><div>[ 32.854] (II) VIA(0): [EXA] Trying to enable EXA acceleration.</div>
<div><br></div></div><div><div><div class="gmail_extra"><br><br><div class="gmail_quote">On Mon, May 12, 2014 at 11:03 AM, Daniel Narvaez <span dir="ltr"><<a href="mailto:dwnarvaez@gmail.com" target="_blank">dwnarvaez@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">I'm not quite convinced this is due to the not initialized eth0 (I'm not sure what that is due too though). From the serial console are you able to see the content of /var/log/Xorg.0.log (assuming there is one)?<br>
</div><div class="gmail_extra"><div><div><br><br><div class="gmail_quote">On 12 May 2014 15:08, Gonzalo Odiard <span dir="ltr"><<a href="mailto:godiard@sugarlabs.org" target="_blank">godiard@sugarlabs.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">log from xo-1.5<div><br></div><div>Looks like eth0 is not initialized and all stop there.</div><div>Probably you already know that, but xo-1 and xo-1.5 have a 8686 wireless card, different to the 8787 in the xo-4</div>
<span><font color="#888888">
<div><br></div><div>Gonzalo</div></font></span></div><div><div><div class="gmail_extra"><br><br><div class="gmail_quote">On Mon, May 12, 2014 at 9:36 AM, Daniel Narvaez <span dir="ltr"><<a href="mailto:dwnarvaez@gmail.com" target="_blank">dwnarvaez@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Ok, at least the partitions problem is fixed then. If Gonzalo can look at the logs with a serial port that might tell what is going on. I susoect the X driver but hard to say blindly :)<br>
</div><div class="gmail_extra"><div><div>
<br><br><div class="gmail_quote">On 12 May 2014 14:34, Martin Abente <span dir="ltr"><<a href="mailto:martin.abente.lahaye@gmail.com" target="_blank">martin.abente.lahaye@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">Regarding XO 1.5 image, no more kernel panic, but as Gonzalo mentioned the fading problem is still present.</div><div><div><div class="gmail_extra"><br><br><div class="gmail_quote">
On Mon, May 12, 2014 at 7:53 AM, Gonzalo Odiard <span dir="ltr"><<a href="mailto:godiard@sugarlabs.org" target="_blank">godiard@sugarlabs.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">I will attach a serial cable later and report.<span><font color="#888888"><div><br></div>
<div>Gonzalo</div></font></span></div><div class="gmail_extra"><div><div><br><br><div class="gmail_quote">On Mon, May 12, 2014 at 8:51 AM, Daniel Narvaez <span dir="ltr"><<a href="mailto:dwnarvaez@gmail.com" target="_blank">dwnarvaez@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">How far does it get? What are the last messages you see? <div><br></div><div>Mostly I wonder if it's the partitions issue that tch reported yesterday or if we fail when running X.<div>
<div><br><br>On Monday, 12 May 2014, Gonzalo Odiard <<a href="mailto:godiard@sugarlabs.org" target="_blank">godiard@sugarlabs.org</a>> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">xo-1.5 image do not boot, and show a strange gey patterns in the screen.<div><br></div><div>Gonzalo</div>
</div><div><br><br><div>On Mon, May 12, 2014 at 8:01 AM, Daniel Narvaez <span dir="ltr"><<a>dwnarvaez@gmail.com</a>></span> wrote:<br>
<blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">The xo1 image boots into sugar (latest from git) and wifi works. I'm now building xo4 images<br></div>
<div><div><div><br><br><div>On 12 May 2014 02:12, Daniel Narvaez <span dir="ltr"><<a>dwnarvaez@gmail.com</a>></span> wrote:<br>
<blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div><div>A couple more images, for xo1 and xo1.5. They have sugar packages built from latest sugar git. I have not tested them yet so they might not even boot, but if someone gives them a try please let me know how they works.<br>
<br><a href="http://146.185.144.82:3000/images/xo1/1/" target="_blank">http://146.185.144.82:3000/images/xo1/1/</a><br><a href="http://146.185.144.82:3000/images/xo1.5/1/" target="_blank">http://146.185.144.82:3000/images/xo1.5/1/</a><br>
<br>The xo1.5 one also *attempts* to fix the issue reported by Martin. The problem is that I'm running the x86 build slave inside <a href="http://docker.io" target="_blank">docker.io</a>, which doesn't like xpart. So I patched olpc-os-builder to manually losetup the partitions, but it's sort of tricky to get right. It will work eventually :)<br>
<br></div>I have arm packages for latest git almost built, so tomorrow I should be able to build xo1.75 and xo4 images too. The oob configurations and some initial bits of automated builds infra are now here<br></div><br>
<a href="https://github.com/dnarvaez/xugar" target="_blank">https://github.com/dnarvaez/xugar</a><br><div><br></div></div><div><div><div><br><br><div>On 11 May 2014 20:49, Daniel Narvaez <span dir="ltr"><<a>dwnarvaez@gmail.com</a>></span> wrote:<br>
<blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">This could be a change I made. I will investigate and let you know.<br></div><div><div>
<div><br><br><div>On 11 May 2014 20:31, Martin Abente <span dir="ltr"><<a>martin.abente.lahaye@gmail.com</a>></span> wrote:<br>
<blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hey Daniel,<div><br></div><div>Could you check if this is correct?</div><div><br></div><blockquote style="margin:0 0 0 40px;border:none;padding:0px">
<div><div>$md5sum 10001xx1.zd </div></div><div><div>$0cc8f3f71d636c8dc4464ffb8bf1847b 10001xx1.zd</div>
</div></blockquote><div><br></div><div>Tested with 2 different XOs 1.5 and I am getting kernel panic errors very early on the boot sequence, with message:</div><div><br></div><blockquote style="margin:0 0 0 40px;border:none;padding:0px">
<div>tmpfs: No value for mount option 'strictatime'</div><div>mount: mounting on /newrun failed: invalid argument</div><div>mount used greatest stack depth 6752 bytes left.</div></blockquote><div><br></div><div><br>
</div></div><div><div><div><br><br><div>On Sun, May 11, 2014 at 12:47 PM, Gonzalo Odiard <span dir="ltr"><<a>godiard@sugarlabs.org</a>></span> wrote:<br>
<blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Downloading...</div><div><div><div><br><br><div>On Sun, May 11, 2014 at 1:31 PM, Martin Abente <span dir="ltr"><<a>martin.abente.lahaye@gmail.com</a>></span> wrote:<br>
<blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Downloading 10001xx1.zd , will let you know how it goes soon.</div><div><div><div>
<br><br><div>On Sun, May 11, 2014 at 12:19 PM, Daniel Narvaez <span dir="ltr"><<a>dwnarvaez@gmail.com</a>></span> wrote:<br>
<blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>I made builds for xo1 and xo1.5 with the firmware change<br><br><a href="http://sugarlabs.org/~dnarvaez/oob/images/" target="_blank"></a></div>
</div></blockquote></div></div></div></div></blockquote></div></div></div></div></blockquote></div></div></div></div></blockquote></div></div></div></div></blockquote></div></div></div></div></blockquote></div></div></div>
</div></blockquote></div></div></blockquote></div></div></div><span><font color="#888888"><br><br>-- <br>Daniel Narvaez<br><br>
</font></span></blockquote></div><br><br clear="all"><div><br></div></div></div><div>-- <br><div dir="ltr">Gonzalo Odiard<br><br><div>SugarLabs - Software for children learning <br></div></div>
</div></div>
</blockquote></div><br></div>
</div></div></blockquote></div><br><br clear="all"><br></div></div><span><font color="#888888">-- <br>Daniel Narvaez<br>
</font></span></div>
</blockquote></div><br><br clear="all"><div><br></div>-- <br><div dir="ltr">Gonzalo Odiard<br><br><div>SugarLabs - Software for children learning <br></div></div>
</div>
</div></div></blockquote></div><br><br clear="all"><br></div></div><span><font color="#888888">-- <br>Daniel Narvaez<br>
</font></span></div>
</blockquote></div><br><br clear="all"><div><br></div>-- <br><div dir="ltr">Gonzalo Odiard<br><br><div>SugarLabs - Software for children learning <br></div></div>
</div>
</div></div></blockquote></div><br><br clear="all"><br></div></div><span class="HOEnZb"><font color="#888888">-- <br>Daniel Narvaez<br>
</font></span></div>
</blockquote></div><br><br clear="all"><div><br></div>-- <br><div dir="ltr">Gonzalo Odiard<br><br><div>SugarLabs - Software for children learning <br></div></div>
</div>