[Sugar-devel] Problem with Sugar Record activity OS-Builder
Alejandro Calderón
alejokalderon at gmail.com
Tue Aug 28 19:40:50 EDT 2018
So I can take photos with the button on the activity but I cannot see the
image on the activity, my log is like the last that I sent:
* Message: pygobject_register_sinkfunc is deprecated (GstObject)
** Message: pygobject_register_sinkfunc is deprecated (HippoCanvasBox)
1535495475.411696 WARNING root: KeepButton has been deprecated since Sugar
0.94 and should not be used in newly written code.
1535495475.419416 WARNING root: No gtk.AccelGroup in the top level window.
1535495475.430349 WARNING root: No gtk.AccelGroup in the top level window.
/usr/lib/python2.7/site-packages/sugar/graphics/window.py:191: GtkWarning:
IA__gtk_container_remove: assertion 'GTK_IS_TOOLBAR (container) ||
widget->parent == GTK_WIDGET (container)' failed
self.__vbox.remove(self._toolbar_box)
1535495475.448733 WARNING root: No gtk.AccelGroup in the top level window.
1535495475.454918 WARNING root: No gtk.AccelGroup in the top level window.
1535495475.460284 WARNING root: No gtk.AccelGroup in the top level window.
1535495475.470036 WARNING root: No gtk.AccelGroup in the top level window.
1535495475.487379 WARNING root: No gtk.AccelGroup in the top level window.
1535495475.506385 WARNING root: No gtk.AccelGroup in the top level window.
1535495475.558934 WARNING root: No gtk.AccelGroup in the top level window.
1535495533.760489 ERROR dbus.proxies: Introspect error on
:1.20:/org/freedesktop/Telepathy/Connection/salut/local_xmpp/_31225eebf:
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message
did not receive a reply (timeout by message bus)
El mar., 28 ago. 2018 a las 18:35, Alejandro Calderón (<
alejokalderon at gmail.com>) escribió:
> No, I didn't, I just reboot the laptop and installed Record-103 no more.
>
> El mar., 28 ago. 2018 a las 18:32, James Cameron (<quozl at laptop.org>)
> escribió:
>
>> No, I don't know. You were sharing over Telepathy Salut?
>>
>> On Tue, Aug 28, 2018 at 06:22:43PM -0500, Alejandro Calderón wrote:
>> > Thanks James,
>> >
>> > So When I try to use Record-103 I got the following log:
>> >
>> > ** Message: pygobject_register_sinkfunc is deprecated (GstObject)
>> > ** Message: pygobject_register_sinkfunc is deprecated (HippoCanvasBox)
>> > 1535494334.609063 WARNING root: KeepButton has been deprecated since
>> Sugar 0.94
>> > and should not be used in newly written code.
>> > 1535494334.616673 WARNING root: No gtk.AccelGroup in the top level
>> window.
>> > 1535494334.627606 WARNING root: No gtk.AccelGroup in the top level
>> window.
>> > /usr/lib/python2.7/site-packages/sugar/graphics/window.py:191:
>> GtkWarning:
>> > IA__gtk_container_remove: assertion 'GTK_IS_TOOLBAR (container) ||
>> widget->
>> > parent == GTK_WIDGET (container)' failed
>> > self.__vbox.remove(self._toolbar_box)
>> > 1535494334.647183 WARNING root: No gtk.AccelGroup in the top level
>> window.
>> > 1535494334.653001 WARNING root: No gtk.AccelGroup in the top level
>> window.
>> > 1535494334.671563 WARNING root: No gtk.AccelGroup in the top level
>> window.
>> > 1535494334.681715 WARNING root: No gtk.AccelGroup in the top level
>> window.
>> > 1535494334.695245 WARNING root: No gtk.AccelGroup in the top level
>> window.
>> > 1535494334.712564 WARNING root: No gtk.AccelGroup in the top level
>> window.
>> > 1535494334.780110 WARNING root: No gtk.AccelGroup in the top level
>> window.
>> > 1535494405.524055 ERROR dbus.proxies: Introspect error on :1.21:/org/
>> > freedesktop/Telepathy/Connection/salut/local_xmpp/_31225eebf:
>> > dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply:
>> Message did
>> > not receive a reply (timeout by message bus)
>> >
>> > Do you know what could happening?
>> >
>> > Thank you again!
>> >
>> > El lun., 27 ago. 2018 a las 23:14, James Cameron (<[1]quozl at laptop.org
>> >)
>> > escribió:
>> >
>> > Record 103 works for me with Fedora 18, OLPC OS 13.2.9.
>> >
>> > I don't know how to make Record work for Fedora 20. It may need
>> > xorg-x11-drv-chrome or xorg-x11-server package changes. It may need
>> > GStreamer or Record changes.
>> >
>> > VideoOrientationMethod feature was added to GStreamer API after
>> 1.10.
>> > Fedora 20 has GStreamer 1.2.4, which is long time before 1.10.
>> >
>> > Using VideoOrientationMethod feature was added to Record 200, for
>> > Ubuntu 18.04 on OLPC NL3 laptops.
>> >
>> > Using VideoOrientationMethod feature was removed for Record 200.1,
>> > for Ubuntu 16.04 on OLPC NL3 laptops.
>> >
>> > The message about VideoOrientationMethod could only happen with
>> Record
>> > 200. Means can't be used with Fedora 18. You must have tested 200
>> > rather than 95. You've shown it can't be used with Fedora 20
>> either.
>> >
>> > Record 200.2 is waiting for review and test, but does not have any
>> > fixes for Fedora 20.
>> >
>> > [2]https://github.com/sugarlabs/record-activity/pull/22
>> >
>> > On Mon, Aug 27, 2018 at 10:23:58PM -0500, Alejandro Calderón wrote:
>> > > So the camera in record activity not work but when I execute
>> cheese from
>> > > terminal it works good, I was tried with Record 95, 102 and 103
>> but still
>> > > appearing a gray Square in the area that the video should
>> appear. With
>> > Record
>> > > 95 the message is.
>> > >
>> > > gi.repository.gstvideo object has no attribute
>> VideoOrientationMethod.
>> > >
>> > > Any idea?
>> > >
>> > > On Mon, Aug 27, 2018, 22:18 James Cameron <[1][3]quozl at laptop.org>
>> wrote:
>> > >
>> > > The warning message was removed for Sugar 0.112 as it has no
>> > importance.
>> > >
>> > > It was removed in 2015 for the GTK+ 3 Sugar Toolkit;
>> > >
>> > > [2][4]https://github.com/sugarlabs/sugar-toolkit-gtk3/commit/
>> > > a11639eb86550bffdd887325f6fa72be0972b776#
>> > > diff-82a1c101a8292b58bf682a07de6c42d9
>> > >
>> > > It was removed in 2017 for the GTK+ 2 Sugar Toolkit;
>> > >
>> > > [3][5]https://github.com/sugarlabs/sugar-toolkit/commit/
>> > > 5dec119ccd6d10b3aef5aced9fe9668838b8dc3c
>> > >
>> > > Apart from the warning, is there any other observation?
>> > >
>> > > Which version of Record activity?
>> > >
>> > > On Mon, Aug 27, 2018 at 09:36:20PM -0500, Alejandro Calderón
>> wrote:
>> > > > Hi James,
>> > > >
>> > > > I make a downgrade of the kernel to that you says and it
>> works in
>> > cheese
>> > > and
>> > > > camorama perfectly but when I open the Record activity in
>> sugar I
>> > got the
>> > > > following log.
>> > > >
>> > > > WARNING root: No gtk.AvvelGroup in the top level window.
>> > > >
>> > > > Do you know what could be happening?
>> > > >
>> > > > Thank you again.
>> > > >
>> > > > Regards!
>> > > >
>> > > > On Mon, Aug 27, 2018, 00:03 James Cameron <[1][4][6]
>> > quozl at laptop.org> wrote:
>> > > >
>> > > > G'day,
>> > > >
>> > > > I don't know if kernel 3.3.8 will work with Fedora 20,
>> sorry.
>> > > >
>> > > > For Fedora 18, we use [2][5][7]
>> http://rpmdropbox.laptop.org/
>> > f18-xo1.5/
>> > > in ini
>> > > > file, like so;
>> > > >
>> > > > [3][6][8]
>> http://dev.laptop.org/git/projects/olpc-os-builder/
>> > tree/
>> > > examples/
>> > > > olpc-os-13.2.9-xo1.5.ini?h=v7.0
>> > > >
>> > > > On Sun, Aug 26, 2018 at 11:15:14PM -0500, Alejandro
>> Calderón
>> > wrote:
>> > > > > Hi James,
>> > > > >
>> > > > > Thank you for your suggestions, so can I use the
>> kernel that
>> > you
>> > > > recommend me
>> > > > > with f20? And if this is possible, how can I modify
>> the
>> > kernel in
>> > > the
>> > > > .ini file
>> > > > > of my olpc-os-builder?
>> > > > >
>> > > > > Thank you again.
>> > > > >
>> > > > > On Sun, Aug 26, 2018, 23:06 James Cameron <[1][4][7]
>> > > [9]quozl at laptop.org> wrote:
>> > > > >
>> > > > > G'day,
>> > > > >
>> > > > > Thanks for the dmesg.
>> > > > >
>> > > > > You are using kernel
>> > 3.10.0_xo1.5-20130716.1747.olpc.c06da27
>> > > > >
>> > > > > This kernel was not finished. This kernel was
>> from
>> > development
>> > > > branch
>> > > > > olpc-3.10 which was added to rpmdropbox for
>> Fedora 20
>> > > development.
>> > > > >
>> > > > > Your dmesg shows kernel detected the camera sensor
>> > "ov7670
>> > > 1-0021:
>> > > > > chip found @ 0x42 (viafb i2c io_port idx 0x31)",
>> so the
>> > sensor
>> > > looks
>> > > > > to be responding correctly to probe. I don't
>> know why it
>> > > doesn't
>> > > > work
>> > > > > with GStreamer; and I don't remember working on
>> that
>> > problem.
>> > > > >
>> > > > > You may try kernel 3.3.8 from development branch
>> x86-3.3,
>> > > maintained
>> > > > > in rpmdropbox for Fedora 18.
>> > > > >
>> > > > > [2][5][8][10]
>> http://rpmdropbox.laptop.org/f18-xo1.5/
>> > > > >
>> > > > > We use this kernel in OLPC OS 13.2.9. It
>> supports newer
>> > > cameras we
>> > > > > used as spare parts.
>> > > > >
>> > > > > On Sun, Aug 26, 2018 at 10:09:18PM -0500,
>> Alejandro
>> > Calderón
>> > > wrote:
>> > > > > > Hi and thank you again.
>> > > > > >
>> > > > > > At following my dmesg result.
>> > > > > >
>> > > > > > Regards!
>> > > > > >
>> > > > > > [ 0.000000] Initializing cgroup subsys cpu
>> > > > > > [ 0.000000] Linux version
>> > > > 3.10.0_xo1.5-20130716.1747.olpc.c06da27
>> > > > > >
>> > > > >
>> > > >
>> > >
>> > (mockbuild@
>>
>> > > > > > [1][3][6][9][11]bob.laptop.org) (gcc version
>> 4.8.1
>> > 20130715 (Red
>> > > Hat
>> > > > 4.8.1-4) (GCC)
>> > > > > ) #1
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> PREEMPT
>> > > > > > Tue Jul 16 17:53:37 EDT 2013
>> > > > > > [ 0.000000] OFW detected in memory, cif @
>> 0xff83ae68
>> > > (reserving
>> > > > top
>> > > > > 8MB)
>> > > > > > [ 0.000000] Reserving virtual address space
>> above
>> > > 0xff800000
>> > > > > > [ 0.000000] e820: BIOS-provided physical RAM
>> map:
>> > > > > > [ 0.000000] BIOS-e801: [mem
>> > > > 0x0000000000000000-0x000000000009efff]
>> > > > > usable
>> > > > > > [ 0.000000] BIOS-e801: [mem
>> > > > 0x0000000000100000-0x000000003b6c1bff]
>> > > > > usable
>> > > > > > [ 0.000000] Notice: NX (Execute Disable)
>> protection
>> > cannot
>> > > be
>> > > > enabled:
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> non-PA
>> > > > > > E kernel!
>> > > > > > [ 0.000000] Legacy DMI 2.1 present.
>> > > > > > [ 0.000000] DMI: OLPC XO/XO, BIOS OLPC Ver
>> 1.00.15
>> > 06/13/
>> > > 2014
>> > > > > > [ 0.000000] e820: update [mem
>> 0x00000000-0x00000fff]
>> > > usable ==>
>> > > > > reserved
>> > > > > > [ 0.000000] e820: remove [mem
>> 0x000a0000-0x000fffff]
>> > > usable
>> > > > > > [ 0.000000] e820: last_pfn = 0x3b6c1
>> max_arch_pfn =
>> > > 0x100000
>> > > > > > [ 0.000000] initial memory mapped: [mem
>> > > 0x00000000-0x01bfffff]
>> > > > > > [ 0.000000] Base memory trampoline at
>> [b009b000]
>> > 9b000
>> > > size
>> > > > 16384
>> > > > > > [ 0.000000] init_memory_mapping: [mem
>> > > 0x00000000-0x000fffff]
>> > > > > > [ 0.000000] [mem 0x00000000-0x000fffff]
>> page 4k
>> > > > > > [ 0.000000] init_memory_mapping: [mem
>> > > 0x3b000000-0x3b3fffff]
>> > > > > > [ 0.000000] [mem 0x3b000000-0x3b3fffff]
>> page 2M
>> > > > > > [ 0.000000] init_memory_mapping: [mem
>> > > 0x38000000-0x3affffff]
>> > > > > > [ 0.000000] [mem 0x38000000-0x3affffff]
>> page 2M
>> > > > > > [ 0.000000] init_memory_mapping: [mem
>> > > 0x00100000-0x37ffffff]
>> > > > > > [ 0.000000] [mem 0x00100000-0x003fffff]
>> page 4k
>> > > > > > [ 0.000000] [mem 0x00400000-0x37ffffff]
>> page 2M
>> > > > > > [ 0.000000] init_memory_mapping: [mem
>> > > 0x3b400000-0x3b6c0fff]
>> > > > > > [ 0.000000] [mem 0x3b400000-0x3b6c0fff]
>> page 4k
>> > > > > > [ 0.000000] BRK [0x015b1000, 0x015b1fff]
>> PGTABLE
>> > > > > > [ 0.000000] RAMDISK: [mem
>> 0x3b6c1c00-0x3bdfcfff]
>> > > > > > [ 0.000000] Allocated new RAMDISK: [mem
>> > > 0x3af85000-0x3b6c03ff]
>> > > > > > [ 0.000000] Move RAMDISK from [mem
>> > 0x3b6c1c00-0x3bdfcfff]
>> > > to
>> > > > [mem
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> 0x3af85000-
>> > > > > > 0x3b6c03ff]
>> > > > > > [ 0.000000] ACPI: RSDP 000e0000 00024 (v02
>> OLPC )
>> > > > > > [ 0.000000] ACPI: RSDT 000e0040 00034 (v01
>> OLPC
>> > OLPC_000
>> > > > 30303030
>> > > > > OLPC
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> 3030
>> > > > > > 3030)
>> > > > > > [ 0.000000] ACPI: FACP 000e0080 00084 (v02
>> OLPC
>> > OLPC_000
>> > > > 30303030
>> > > > > OLPC
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> 3030
>> > > > > > 3030)
>> > > > > > [ 0.000000] ACPI: DSDT 000fc000 0238C (v01
>> OLPC
>> > XO-1.5
>> > > > 00000001
>> > > > > INTL
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> 2006
>> > > > > > 1109)
>> > > > > > [ 0.000000] ACPI: FACS 000e0180 00040
>> > > > > > [ 0.000000] ACPI: DSDT 000fc000 0238C (v01
>> OLPC
>> > XO-1.5
>> > > > 00000001
>> > > > > INTL
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> 2006
>> > > > > > 1109)
>> > > > > > [ 0.000000] ACPI: APIC 000e0200 0005A (v01
>> OLPC
>> > OLPC_000
>> > > > 30303030
>> > > > > OLPC
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> 3030
>> > > > > > 3030)
>> > > > > > [ 0.000000] ACPI: HPET 000e0280 00038 (v01
>> OLPC
>> > OLPC_000
>> > > > 30303030
>> > > > > OLPC
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> 3030
>> > > > > > 3030)
>> > > > > > [ 0.000000] ACPI: Local APIC address
>> 0xfee00000
>> > > > > > [ 0.000000] 950MB LOWMEM available.
>> > > > > > [ 0.000000] mapped low ram: 0 - 3b6c1000
>> > > > > > [ 0.000000] low ram: 0 - 3b6c1000
>> > > > > > [ 0.000000] PROM DT: Built device tree with
>> 45056
>> > bytes of
>> > > > memory.
>> > > > > > [ 0.000000] Zone ranges:
>> > > > > > [ 0.000000] DMA [mem
>> 0x00001000-0x00ffffff]
>> > > > > > [ 0.000000] Normal [mem
>> 0x01000000-0x3b6c0fff]
>> > > > > > [ 0.000000] Movable zone start for each node
>> > > > > > [ 0.000000] Early memory node ranges
>> > > > > > [ 0.000000] node 0: [mem
>> 0x00001000-0x0009efff]
>> > > > > > [ 0.000000] node 0: [mem
>> 0x00100000-0x3b6c0fff]
>> > > > > > [ 0.000000] On node 0 totalpages: 243295
>> > > > > > [ 0.000000] free_area_init_node: node 0,
>> pgdat
>> > b150cb20,
>> > > > node_mem_map
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> ea80a02
>> > > > > > 0
>> > > > > > [ 0.000000] DMA zone: 32 pages used for
>> memmap
>> > > > > > [ 0.000000] DMA zone: 0 pages reserved
>> > > > > > [ 0.000000] DMA zone: 3998 pages, LIFO
>> batch:0
>> > > > > > [ 0.000000] Normal zone: 1870 pages used
>> for
>> > memmap
>> > > > > > [ 0.000000] Normal zone: 239297 pages, LIFO
>> > batch:31
>> > > > > > [ 0.000000] Using APIC driver default
>> > > > > > [ 0.000000] ACPI: PM-Timer IO Port: 0x408
>> > > > > > [ 0.000000] ACPI: Local APIC address
>> 0xfee00000
>> > > > > > [ 0.000000] ACPI: LAPIC (acpi_id[0x00]
>> lapic_id
>> > [0x00]
>> > > enabled)
>> > > > > > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00]
>> high edge
>> > lint
>> > > [0x1])
>> > > > > > [ 0.000000] ACPI: IOAPIC (id[0x01] address
>> > [0xfec00000]
>> > > gsi_base
>> > > > [0])
>> > > > > > [ 0.000000] IOAPIC[0]: apic_id 1, version 3,
>> address
>> > > 0xfec00000,
>> > > > GSI
>> > > > > 0-23
>> > > > > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq
>> 0
>> > global_irq
>> > > 2 high
>> > > > edge)
>> > > > > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq
>> 9
>> > global_irq
>> > > 9 low
>> > > > level)
>> > > > > > [ 0.000000] ACPI: IRQ0 used by override.
>> > > > > > [ 0.000000] ACPI: IRQ2 used by override.
>> > > > > > [ 0.000000] ACPI: IRQ9 used by override.
>> > > > > > [ 0.000000] ACPI: IRQ10 used by override.
>> > > > > > [ 0.000000] Using ACPI (MADT) for SMP
>> configuration
>> > > information
>> > > > > > [ 0.000000] ACPI: HPET id: 0x11068201 base:
>> > 0xfed00000
>> > > > > > [ 0.000000] nr_irqs_gsi: 40
>> > > > > > [ 0.000000] e820: [mem 0x3b6c1c00-0xffffffff]
>> > available
>> > > for PCI
>> > > > > devices
>> > > > > > [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768
>> alloc=
>> > 1*32768
>> > > > > > [ 0.000000] pcpu-alloc: [0] 0
>> > > > > > [ 0.000000] Built 1 zonelists in Zone order,
>> > mobility
>> > > grouping
>> > > > on.
>> > > > > Total
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> pag
>> > > > > > es: 241393
>> > > > > > [ 0.000000] Kernel command line: console=
>> > ttyS0,115200
>> > > console=
>> > > > tty0
>> > > > > fbcon=
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> font
>> > > > > > :SUN12x22 no_console_suspend selinux=0
>> > > > > > [ 0.000000] PID hash table entries: 4096
>> (order: 2,
>> > 16384
>> > > bytes)
>> > > > > > [ 0.000000] Dentry cache hash table entries:
>> 131072
>> > > (order: 7,
>> > > > 524288
>> > > > > bytes)
>> > > > > > [ 0.000000] Inode-cache hash table entries:
>> 65536
>> > (order:
>> > > 6,
>> > > > 262144
>> > > > > bytes)
>> > > > > > [ 0.000000] Initializing CPU#0
>> > > > > > [ 0.000000] Memory: 951356k/973572k
>> available (3885k
>> > > kernel
>> > > > code,
>> > > > > 21824k
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> rese
>> > > > > > rved, 1305k data, 348k init, 0k highmem)
>> > > > > > [ 0.000000] virtual kernel memory layout:
>> > > > > > fixmap : 0xff7a2000 - 0xff7ff000 ( 372
>> kB)
>> > > > > > vmalloc : 0xebec1000 - 0xff7a0000 ( 312
>> MB)
>> > > > > > lowmem : 0xb0000000 - 0xeb6c1000 ( 950
>> MB)
>> > > > > > .init : 0xb1512000 - 0xb1569000 ( 348
>> kB)
>> > > > > > .data : 0xb13cb5b4 - 0xb1511c00 (1305
>> kB)
>> > > > > > .text : 0xb1000000 - 0xb13cb5b4 (3885
>> kB)
>> > > > > > [ 0.000000] Checking if this processor
>> honours the
>> > WP bit
>> > > even
>> > > > in
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> supervisor
>> > > > > > mode...Ok.
>> > > > > > [ 0.000000] SLUB: HWalign=64, Order=0-3,
>> MinObjects=
>> > 0,
>> > > CPUs=1,
>> > > > Nodes=1
>> > > > > > [ 0.000000] Preemptible hierarchical RCU
>> > implementation.
>> > > > > > [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
>> > > > > > [ 0.000000] CPU 0 irqstacks, hard=ea008000
>> soft=
>> > ea00a000
>> > > > > > [ 0.000000] Console: colour dummy device
>> 80x25
>> > > > > > [ 0.000000] console [tty0] enabled
>> > > > > > [ 0.000000] console [ttyS0] enabled
>> > > > > > [ 0.000000] hpet clockevent registered
>> > > > > > [ 0.000000] tsc: Fast TSC calibration using
>> PIT
>> > > > > > [ 0.000000] tsc: Detected 997.529 MHz
>> processor
>> > > > > > [ 0.010003] Calibrating delay loop
>> (skipped), value
>> > > calculated
>> > > > using
>> > > > > timer
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> fr
>> > > > > > equency.. 1995.05 BogoMIPS (lpj=9975290)
>> > > > > > [ 0.022815] pid_max: default: 32768 minimum:
>> 301
>> > > > > > [ 0.030096] Mount-cache hash table entries:
>> 512
>> > > > > > [ 0.040419] Last level iTLB entries: 4KB 0,
>> 2MB 0,
>> > 4MB 0
>> > > > > > Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
>> > > > > > tlb_flushall_shift: -1
>> > > > > > [ 0.050004] CPU: Centaur VIA C7-M Processor
>> 1000MHz
>> > (fam:
>> > > 06,
>> > > > model:
>> > > > > 0d,
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> step
>> > > > > > ping: 00)
>> > > > > > [ 0.061616] ACPI: Core revision 20130328
>> > > > > > [ 0.071120] ACPI: All ACPI Tables
>> successfully
>> > acquired
>> > > > > > [ 0.076530] Performance Events:
>> > > > > > [ 0.079927] Enabling APIC mode: Flat.
>> Using 1 I/O
>> > APICs
>> > > > > > [ 0.080479] ..TIMER: vector=0x30 apic1=0
>> pin1=2
>> > apic2=-1
>> > > pin2=-1
>> > > > > > [ 0.200245] devtmpfs: initialized
>> > > > > > [ 0.204281] NET: Registered protocol family
>> 16
>> > > > > > [ 0.209219] ACPI: bus type PCI registered
>> > > > > > [ 0.211219] OLPC board revision D8 (EC=60)
>> > > > > > [ 0.215940] PCI: Using configuration type 1
>> for base
>> > > access
>> > > > > > [ 0.223898] bio: create slab <bio-0> at 0
>> > > > > > [ 0.230248] ACPI: Added _OSI(Module Device)
>> > > > > > [ 0.234453] ACPI: Added _OSI(Processor
>> Device)
>> > > > > > [ 0.240021] ACPI: Added _OSI(3.0 _SCP
>> Extensions)
>> > > > > > [ 0.244742] ACPI: Added _OSI(Processor
>> Aggregator
>> > Device)
>> > > > > > [ 0.251463] ACPI: EC: Look up EC in DSDT
>> > > > > > [ 0.260201] ACPI: Interpreter enabled
>> > > > > > [ 0.263902] ACPI Exception: AE_NOT_FOUND,
>> While
>> > evaluating
>> > > Sleep
>> > > > State
>> > > > > [\
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> _S1_
>> > > > > > ] (20130328/hwxface-568)
>> > > > > > [ 0.272213] ACPI Exception: AE_NOT_FOUND,
>> While
>> > evaluating
>> > > Sleep
>> > > > State
>> > > > > [\
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> _S2_
>> > > > > > ] (20130328/hwxface-568)
>> > > > > > [ 0.282229] ACPI: (supports S0 S3 S5)
>> > > > > > [ 0.285904] ACPI: Using IOAPIC for interrupt
>> routing
>> > > > > > [ 0.290093] PCI: Using host bridge windows
>> from
>> > ACPI; if
>> > > > necessary,
>> > > > > use "pci
>> > > > > > =
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>>
>> > > > > > nocrs" and report a bug
>> > > > > > [ 0.333335] ACPI: PCI Root Bridge [PCI0]
>> (domain
>> > 0000 [bus
>> > > > 00-ff])
>> > > > > > [ 0.339884] acpi PNP0A03:00: host bridge
>> window
>> > expanded
>> > > to [mem
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> 0x40000000-0
>> > > > > > xffe80000]; [mem 0x40000000-0xffe80000] ignored
>> > > > > > [ 0.340022] acpi PNP0A03:00: fail to add
>> MMCONFIG
>> > > information,
>> > > > can't
>> > > > > access
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> e
>> > > > > > xtended PCI configuration space under this
>> bridge.
>> > > > > > [ 0.350131] PCI host bridge to bus 0000:00
>> > > > > > [ 0.354247] pci_bus 0000:00: root bus
>> resource [bus
>> > 00-ff]
>> > > > > > [ 0.360010] pci_bus 0000:00: root bus
>> resource [io
>> > > > 0x0000-0x0cf7]
>> > > > > > [ 0.366212] pci_bus 0000:00: root bus
>> resource [io
>> > > > 0x0d00-0xffff]
>> > > > > > [ 0.370010] pci_bus 0000:00: root bus
>> resource [mem
>> > > > > 0x000a0000-0x000bffff]
>> > > > > > [ 0.380010] pci_bus 0000:00: root bus
>> resource [mem
>> > > > > 0x000c0000-0x000dffff]
>> > > > > > [ 0.386908] pci_bus 0000:00: root bus
>> resource [mem
>> > > > > 0x40000000-0xffe80000]
>> > > > > > [ 0.390049] pci 0000:00:00.0: [1106:0409]
>> type 00
>> > class
>> > > 0x060000
>> > > > > > [ 0.390314] pci 0000:00:00.1: [1106:1409]
>> type 00
>> > class
>> > > 0x060000
>> > > > > > [ 0.390563] pci 0000:00:00.2: [1106:2409]
>> type 00
>> > class
>> > > 0x060000
>> > > > > > [ 0.390802] pci 0000:00:00.3: [1106:3409]
>> type 00
>> > class
>> > > 0x060000
>> > > > > > [ 0.390980] pci 0000:00:00.4: [1106:4409]
>> type 00
>> > class
>> > > 0x060000
>> > > > > > [ 0.391214] pci 0000:00:00.5: [1106:5409]
>> type 00
>> > class
>> > > 0x080020
>> > > > > > [ 0.391485] pci 0000:00:00.6: [1106:6409]
>> type 00
>> > class
>> > > 0x060000
>> > > > > > [ 0.391723] pci 0000:00:00.7: [1106:7409]
>> type 00
>> > class
>> > > 0x060000
>> > > > > > [ 0.391963] pci 0000:00:01.0: [1106:5122]
>> type 00
>> > class
>> > > 0x030000
>> > > > > > [ 0.391994] pci 0000:00:01.0: reg 10: [mem
>> > > 0xd0000000-0xd3ffffff
>> > > > pref]
>> > > > > > [ 0.392014] pci 0000:00:01.0: reg 14: [mem
>> > > > 0xf0000000-0xf0ffffff]
>> > > > > > [ 0.392064] pci 0000:00:01.0: reg 30: [mem
>> > > 0x00000000-0x0000ffff
>> > > > pref]
>> > > > > > [ 0.392098] pci 0000:00:01.0: supports D1 D2
>> > > > > > [ 0.392319] pci 0000:00:0c.0: [1106:95d0]
>> type 00
>> > class
>> > > 0x080501
>> > > > > > [ 0.392349] pci 0000:00:0c.0: reg 10: [mem
>> > > > 0x80000000-0x800000ff]
>> > > > > > [ 0.392370] pci 0000:00:0c.0: reg 14: [mem
>> > > > 0x80001000-0x800010ff]
>> > > > > > [ 0.392391] pci 0000:00:0c.0: reg 18: [mem
>> > > > 0x80002000-0x800020ff]
>> > > > > > [ 0.392460] pci 0000:00:0c.0: supports D1 D2
>> > > > > > [ 0.392471] pci 0000:00:0c.0: PME# supported
>> from D0
>> > D1 D2
>> > > D3hot
>> > > > > D3cold
>> > > > > > [ 0.392696] pci 0000:00:10.0: [1106:3038]
>> type 00
>> > class
>> > > 0x0c0300
>> > > > > > [ 0.392762] pci 0000:00:10.0: reg 20: [io
>> > 0x8000-0x801f]
>> > > > > > [ 0.392813] pci 0000:00:10.0: supports D1 D2
>> > > > > > [ 0.392824] pci 0000:00:10.0: PME# supported
>> from D0
>> > D1 D2
>> > > D3hot
>> > > > > D3cold
>> > > > > > [ 0.392884] pci 0000:00:10.0: System wakeup
>> disabled
>> > by
>> > > ACPI
>> > > > > > [ 0.400139] pci 0000:00:10.1: [1106:3038]
>> type 00
>> > class
>> > > 0x0c0300
>> > > > > > [ 0.400205] pci 0000:00:10.1: reg 20: [io
>> > 0x8020-0x803f]
>> > > > > > [ 0.400256] pci 0000:00:10.1: supports D1 D2
>> > > > > > [ 0.400267] pci 0000:00:10.1: PME# supported
>> from D0
>> > D1 D2
>> > > D3hot
>> > > > > D3cold
>> > > > > > [ 0.400337] pci 0000:00:10.1: System wakeup
>> disabled
>> > by
>> > > ACPI
>> > > > > > [ 0.410137] pci 0000:00:10.2: [1106:3038]
>> type 00
>> > class
>> > > 0x0c0300
>> > > > > > [ 0.410203] pci 0000:00:10.2: reg 20: [io
>> > 0x8040-0x805f]
>> > > > > > [ 0.410254] pci 0000:00:10.2: supports D1 D2
>> > > > > > [ 0.410265] pci 0000:00:10.2: PME# supported
>> from D0
>> > D1 D2
>> > > D3hot
>> > > > > D3cold
>> > > > > > [ 0.410334] pci 0000:00:10.2: System wakeup
>> disabled
>> > by
>> > > ACPI
>> > > > > > [ 0.416146] pci 0000:00:10.4: [1106:3104]
>> type 00
>> > class
>> > > 0x0c0320
>> > > > > > [ 0.416178] pci 0000:00:10.4: reg 10: [mem
>> > > > 0x80003000-0x800030ff]
>> > > > > > [ 0.416271] pci 0000:00:10.4: supports D1 D2
>> > > > > > [ 0.416282] pci 0000:00:10.4: PME# supported
>> from D0
>> > D1 D2
>> > > D3hot
>> > > > > D3cold
>> > > > > > [ 0.416360] pci 0000:00:10.4: System wakeup
>> disabled
>> > by
>> > > ACPI
>> > > > > > [ 0.420140] pci 0000:00:11.0: [1106:8409]
>> type 00
>> > class
>> > > 0x060100
>> > > > > > [ 0.420430] pci 0000:00:11.7: [1106:a353]
>> type 00
>> > class
>> > > 0x060000
>> > > > > > [ 0.420672] pci 0000:00:13.0: [1106:b353]
>> type 01
>> > class
>> > > 0x060400
>> > > > > > [ 0.420814] pci 0000:00:13.0: System wakeup
>> disabled
>> > by
>> > > ACPI
>> > > > > > [ 0.426640] pci 0000:00:14.0: [1106:3288]
>> type 00
>> > class
>> > > 0x040300
>> > > > > > [ 0.426668] pci 0000:00:14.0: reg 10: [mem
>> > > 0x80004000-0x80007fff
>> > > > > 64bit]
>> > > > > > [ 0.426747] pci 0000:00:14.0: PME# supported
>> from D0
>> > D3hot
>> > > > D3cold
>> > > > > > [ 0.426854] pci 0000:00:14.0: System wakeup
>> disabled
>> > by
>> > > ACPI
>> > > > > > [ 0.430278] pci 0000:00:13.0: PCI bridge to
>> [bus 01]
>> > > > > > [ 0.435285] pci_bus 0000:00: on NUMA node 0
>> > > > > > [ 0.435296] acpi PNP0A03:00: Unable to
>> request _OSC
>> > > control
>> > > > (_OSC
>> > > > > support
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> mas
>> > > > > > k: 0x08)
>> > > > > > [ 0.440687] ACPI: PCI Interrupt Link [LNKA]
>> (IRQs 3
>> > 4 5 6
>> > > 7 *10
>> > > > 11 12
>> > > > > 14 15)
>> > > > > > [ 0.452976] ACPI: PCI Interrupt Link [LNKB]
>> (IRQs 3
>> > 4 5 6
>> > > 7 10
>> > > > 11 12
>> > > > > 14 15)
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> *
>> > > > > > 9
>> > > > > > [ 0.463193] ACPI: PCI Interrupt Link [LNKC]
>> (IRQs 3
>> > 4 5 6
>> > > 7 10
>> > > > *11 12
>> > > > > 14 15)
>> > > > > > [ 0.471062] ACPI: PCI Interrupt Link [LNKD]
>> (IRQs 3
>> > 4 5 6
>> > > 7 *10
>> > > > 11 12
>> > > > > 14 15)
>> > > > > > [ 0.478567] ACPI: PCI Interrupt Link [LNKE]
>> (IRQs 3
>> > 4 5 6
>> > > 7 10
>> > > > 11 12
>> > > > > 14 15)
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> *
>> > > > > > 0, disabled.
>> > > > > > [ 0.484161] ACPI: PCI Interrupt Link [LNKF]
>> (IRQs 3
>> > 4 5 6
>> > > 7 10
>> > > > 11 12
>> > > > > 14 15)
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> *
>> > > > > > 0, disabled.
>> > > > > > [ 0.494160] ACPI: PCI Interrupt Link [LNK0]
>> (IRQs 3
>> > 4 5 6
>> > > 7 10
>> > > > 11 12
>> > > > > 14 15)
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> *
>> > > > > > 0, disabled.
>> > > > > > [ 0.504170] ACPI: PCI Interrupt Link [LNK1]
>> (IRQs 3
>> > 4 5 6
>> > > 7 10
>> > > > 11 12
>> > > > > 14 15)
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> *
>> > > > > > 0, disabled.
>> > > > > > [ 0.520803] acpi root: \_SB_.PCI0 notify
>> handler is
>> > > installed
>> > > > > > [ 0.520890] Found 1 acpi root devices
>> > > > > > [ 0.521153] vgaarb: device added:
>> > PCI:0000:00:01.0,decodes
>> > > =
>> > > > io+mem,owns
>> > > > > =
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>> io+mem
>> > > > > > ,locks=none
>> > > > > > [ 0.529276] vgaarb: loaded
>> > > > > > [ 0.530007] vgaarb: bridge control possible
>> > 0000:00:01.0
>> > > > > > [ 0.535628] SCSI subsystem initialized
>> > > > > > [ 0.540014] ACPI: bus type USB registered
>> > > > > > [ 0.544126] usbcore: registered new
>> interface driver
>> > usbfs
>> > > > > > [ 0.550039] usbcore: registered new
>> interface driver
>> > hub
>> > > > > > [ 0.555445] usbcore: registered new device
>> driver
>> > usb
>> > > > > > [ 0.560083] Linux video capture interface:
>> v2.00
>> > > > > > [ 0.564895] Advanced Linux Sound
>> Architecture Driver
>> > > > Initialized.
>> > > > > > [ 0.570005] PCI: Using ACPI for IRQ routing
>> > > > > > [ 0.574211] PCI: pci_cache_line_size set to
>> 64 bytes
>> > > > > > [ 0.574292] e820: reserve RAM buffer [mem
>> > > 0x0009f000-0x0009ffff]
>> > > > > > [ 0.574302] e820: reserve RAM buffer [mem
>> > > 0x3b6c1c00-0x3bffffff]
>> > > > > > [ 0.574774] cfg80211: Calling CRDA to update
>> world
>> > > regulatory
>> > > > domain
>> > > > > > [ 0.580304] Switching to clocksource hpet
>> > > > > > [ 0.584450] pnp: PnP ACPI init
>> > >
>
>
>
> --
> ---
>
> -----
>
> Cordialmente
>
>
>
> *Alejandro CalderónAdministrador De Redes I**nformáticas*
> *gnunick*
> [image: skype] [image: Blogger] <http://www.gnunick.blogspot.com/> [image:
> facebook] <https://www.facebook.com/gnunick> [image: twitter]
> <https://twitter.com/#%21/NickKalderon> [image: linkedIn]
> <http://co.linkedin.com/in/alejocalderon> [image: Google+]
> <https://plus.google.com/u/0/103707175935519332398>
>
> Please do not send me Microsoft Office/Apple iWork Documents. Send
> OpenDocument instead!
>
> Por favor no me envíes documentos de Microsoft Office o de iWork, envíame
> documentos en formatos abiertos como los de OpenOffice.
>
> [image: eco] No me imprimas si no es necesario. Protejamos el medio
> ambiente.
>
> Este mensaje y, en su caso, los ficheros anexos son propiedad de Alejandro
> Calderón, especialmente en lo que respecta a los datos personales, y se
> dirigen exclusivamente al destinatario referenciado. Si usted no lo es y lo
> ha recibido por error o tiene conocimiento del mismo por cualquier motivo,
> le ruego que me lo comunique por este medio y proceda a destruirlo o
> borrarlo, y que en todo caso se abstenga de utilizar, reproducir, alterar,
> archivar o comunicar a terceros el presente mensaje y ficheros anexos, todo
> ello bajo pena de incurrir en responsabilidades legales. El emisor no
> garantiza la integridad, rapidez o seguridad del presente correo, ni se
> responsabiliza de posibles perjuicios derivados de la captura,
> incorporaciones de virus o cualesquiera otras manipulaciones efectuadas por
> terceros.
>
--
---
-----
Cordialmente
*Alejandro CalderónAdministrador De Redes I**nformáticas*
*gnunick*
[image: skype] [image: Blogger] <http://www.gnunick.blogspot.com/> [image:
facebook] <https://www.facebook.com/gnunick> [image: twitter]
<https://twitter.com/#%21/NickKalderon> [image: linkedIn]
<http://co.linkedin.com/in/alejocalderon> [image: Google+]
<https://plus.google.com/u/0/103707175935519332398>
Please do not send me Microsoft Office/Apple iWork Documents. Send
OpenDocument instead!
Por favor no me envíes documentos de Microsoft Office o de iWork, envíame
documentos en formatos abiertos como los de OpenOffice.
[image: eco] No me imprimas si no es necesario. Protejamos el medio
ambiente.
Este mensaje y, en su caso, los ficheros anexos son propiedad de Alejandro
Calderón, especialmente en lo que respecta a los datos personales, y se
dirigen exclusivamente al destinatario referenciado. Si usted no lo es y lo
ha recibido por error o tiene conocimiento del mismo por cualquier motivo,
le ruego que me lo comunique por este medio y proceda a destruirlo o
borrarlo, y que en todo caso se abstenga de utilizar, reproducir, alterar,
archivar o comunicar a terceros el presente mensaje y ficheros anexos, todo
ello bajo pena de incurrir en responsabilidades legales. El emisor no
garantiza la integridad, rapidez o seguridad del presente correo, ni se
responsabiliza de posibles perjuicios derivados de la captura,
incorporaciones de virus o cualesquiera otras manipulaciones efectuadas por
terceros.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sugarlabs.org/archive/sugar-devel/attachments/20180828/f5264630/attachment-0001.html>
More information about the Sugar-devel
mailing list