[Sugar-devel] A network question

[Peter Hewitt]

ok test net

nothing on B

on G:

RSSI: 0  SSID:  Channel: 1
RSSI: 49  SSID:  Channel: 1


At 01:17 PM 11/11/2011, Jerry Vonau wrote:
>On Fri, 2011-11-11 at 12:08 +1000, Peter Hewitt wrote:
> > I'm finally starting to investigate networking on my XOs.
> >
> > I have two XO 1s - Firmware Q2E45 Wireless 5.110.22.p23 Sugar .84.16 
> Build 852
> >
> > Let's call them G (good) & B (bad)
> >
> > The neighbourhood show three mesh symbols on both.
> >
> > On G one pulses but on B ... no pulsing.
> >
> > G finally says "Connected" on Mesh Network 1"
> >
> > When I click "Connect" on Mesh Network 1 on B nothing changes.
> >
> > ifconfig shows
> >
> > eth0, lo & msh0 on G but just lo & msh0 on B
> >
> > I'm sure they both connected fine when they first arrived about 6 
> months ago.
> >
> > The only difference is that G has been worked very hard but B has mostly
> > been resting.
> >
> > Do I assume a hardware problem? Is there any further testing I can do?
> >
> > Thanks ... Peter
>
>I'd check "my computer" to see if the firmware version is being
>displayed. You can do the OFW hardware tests.
>
>Jerry