[Sugar-devel] Fwd: [PATCH sucrose-0.94][RFC] Add capability to connect to WPA/WPA2-Enterprise networks
Ajay Garg
ajay at activitycentral.com
Thu Dec 8 09:58:49 EST 2011
Forwarding to sugar-devel, as the original mail bounced, as I was not
subscribed to the mailing list.
Now I am :-)
Regards,
Ajay
---------- Forwarded message ----------
From: Ajay Garg <ajay at activitycentral.com>
Date: Thu, Dec 8, 2011 at 8:22 PM
Subject: Re: [PATCH sucrose-0.94][RFC] Add capability to connect to
WPA/WPA2-Enterprise networks
To: Anish Mangal <anish at activitycentral.org>
Cc: sugar-devel <sugar-devel at lists.sugarlabs.org>, Dextrose Mailing List <
dextrose at lists.sugarlabs.org>, Sascha Silbe <silbe at activitycentral.com>
Hi all.
The TLS-based authentication is working, if the settings are entered via
nm-applet, but it's not working via python (bindings).
Please find the details below, wherein the details are mentioned in the
mail-conversation with Jirka (a red-hat guy).
The crux is that, if the NetworkManager expects a setting (of type "802-1x"
here), it gives an error, with error code "2" in /var/log/messages.
Inspite of me entering a key_value_dict['client-cert'] entry by manual
hardcoding, it gives the same error (error code "2").
(Also note that I have tried both *key_value_dict['client-cert'] =
'some_value'*, as well as *key_value_dict['client_cert'] = 'some_value'*.
But I always, consistently get the error code "2" (and not may be "1", that
indicates a wrong, but a NON-EMPTY value nevertheless). )
*
Could anyone help?
Or may be guide me as to how to go about looking into the python-bindings
for networkmanager?*
*Here is the mail conversation ::*
=======================================================================================================
If I do set a not-empty, but invalid value for 'eap', like
"key_value_dict['802-1x']['eap'] = ['atls']", I do get the error code "1"
(and not "2").
I may repeat, that setting a NON-EMPTY (correct or incorrect) value for
"key_value_dict['802-1x']['client-cert']" gives the error code "2",
irrespective.
Regards,
Ajay
- Hide quoted text -
On Thu, Dec 8, 2011 at 12:56 PM, Ajay Garg <ajaygargnsit at gmail.com> wrote:
1. I started afresh, removing all properties.
2. I tried to activate the connection (without any '802-1x' setting), I got
the following error ::
* Dec 8 12:46:09 ajay NetworkManager[1455]: <warn> invalid connection
Auto MTNL (665294166e053bc37a0f05c96f79aa7c7ff0b0cd):
'NMSetting8021x' / 'eap' invalid: 2*
Expected.
3. I set "key_value_dict['802-1x]['eap'] = ['tls']", and again activated
the connection.
The above error vanished.
But I got ::
* Dec 8 12:46:09 ajay NetworkManager[1455]: <warn> invalid connection
Auto MTNL (665294166e053bc37a0f05c96f79aa7c7ff0b0cd):
'NMSetting8021x' / 'client-cert' invalid: 2
*
Expected.
4. I also set "key_value_dict['802-1x']['client-cert'] = 'some_bull_shit'",
and again activated the connection.
I (again) got the error ::
* Dec 8 12:46:09 ajay NetworkManager[1455]: <warn> invalid connection
Auto MTNL (665294166e053bc37a0f05c96f79aa7c7ff0b0cd):
'NMSetting8021x' / 'client-cert' invalid: 2
*
Not expected (the setting value may be wrong, but the setting is there.
So, error code should be "1" I guess (and not "2").
Hmm.
What could be done, Jirka? :-|
Regards,
Ajay
=======================================================================================================
Regards,
Ajay
On Fri, Dec 2, 2011 at 3:40 PM, Anish Mangal <anish at activitycentral.org>wrote:
> From: Ajay Garg <ajay at sugarlabs.org>
>
> As per user-workflow, there is no difference :-
> ---------------------------------------------------------------
>
> 1a. The (WPA/WPA2-Enterprise) network-icon is available on the
> neighbourhood-view.
> 1b. Upon clicking the network-icon, a popup dialog appears, asking for
> parameters.
> 1c. Upon clicking ok, the connection is made (shown by the
> 'Network-Connected'-icon in the tray).
>
> 2. If the connection is made successfully, the network-profile is saved
> in "connections.cfg". From next reboot onwards, the connection is made
> automatically.
>
> Configurations :-
> ------------------------
>
> Following configurations have been tested to work :
> 1. Tunnelled TLS (TTLS)
> 2. Protected EAP (PEAP)
>
> Following configurations are still to be tested :
> 1. LEAP (seems that it requires support from the access-point).
> 2. TLS (the testing couldn't be done, even with nm-applet. Would
> like to hear if anyone gets it working with nm-applet, since the
> sugar-parameters-UI is modelled on nm-applet-UI.)
>
> The patch contains the UI-frontend code for entering all 4
> configuration parameters (modelled on nm-applet's "Connect
> to Hidden Wireless Network" -> "WPA/WPA2 Enterprise".
>
> Signed-off-by: Ajay Garg <ajay at activitycentral.com>
> Tested-by: Anish Mangal <anish at activitycentral.com>
> ---
> src/jarabe/desktop/keydialog.py | 174 +++++++++++++++++++++++++-
> src/jarabe/desktop/networkviews.py | 248
> +++++++++++++++++++++++++++++++++++-
> src/jarabe/model/network.py | 22 +++-
> 3 files changed, 437 insertions(+), 7 deletions(-)
>
> diff --git a/src/jarabe/desktop/keydialog.py
> b/src/jarabe/desktop/keydialog.py
> index c72f498..9a1675c 100644
> --- a/src/jarabe/desktop/keydialog.py
> +++ b/src/jarabe/desktop/keydialog.py
> @@ -32,6 +32,10 @@ WEP_PASSPHRASE = 1
> WEP_HEX = 2
> WEP_ASCII = 3
>
> +SETTING_TYPE_STRING = 1
> +SETTING_TYPE_LIST = 2
> +
> +
>
> def string_is_hex(key):
> is_hex = True
> @@ -120,6 +124,158 @@ class KeyDialog(gtk.Dialog):
> return self._response
>
>
> +# Plain Old Python Object (POPO)
> +class NetworkParametersPOPO(gtk.HBox):
> + def __init__(self, auth_param):
> + gtk.HBox.__init__(self, homogeneous=True)
> + self._key = auth_param._key_name
> + self._label = gtk.Label(_(auth_param._key_label))
> + self._key_type = auth_param._key_type
> +
> + # Decide, if we need to show a 'entry',
> + # or a 'list-store'
> + if len(auth_param._options) == 0:
> + self._show_entry = True
> + else:
> + self._show_entry = False
> +
> + self.pack_start(self._label)
> + self._label.show()
> +
> + if self._show_entry:
> + self._entry = gtk.Entry()
> + self.pack_start(self._entry)
> + self._entry.show()
> + else:
> + self._option_store = gtk.ListStore(str, str)
> + for option in auth_param._options:
> + self._option_store.append(option)
> +
> + self._list_store_entry = auth_param._options[0][1]
> + self._option_combo = gtk.ComboBox(self._option_store)
> + cell = gtk.CellRendererText()
> + self._option_combo.pack_start(cell, True)
> + self._option_combo.add_attribute(cell, 'text', 0)
> + self._option_combo.set_active(0)
> + self._option_combo.connect('changed',
> + self._option_combo_changed_cb)
> + self.pack_start(self._option_combo)
> + self.show()
> + self._option_combo.show()
> +
> + def _option_combo_changed_cb(self, widget):
> + it = self._option_combo.get_active_iter()
> + (value, ) = self._option_store.get(it, 1)
> + self._list_store_entry = value
> +
> + def _get_key(self):
> + return self._key
> +
> + def _get_value(self):
> + if self._show_entry:
> + return self._entry.get_text()
> + else:
> + return self._list_store_entry
> +
> +
> +class KeyValuesDialog(gtk.Dialog):
> + def __init__(self, auth_lists, final_callback, uuid, settings):
> + gtk.Dialog.__init__(self, flags=gtk.DIALOG_MODAL)
> + self.set_title(_('Wireless Parameters required'))
> +
> + self._auth_lists = auth_lists
> + self._final_callback = final_callback
> + self._uuid = uuid
> + self._settings = settings
> +
> + label = gtk.Label(_("Please enter parameters\n"))
> + self.vbox.pack_start(label)
> +
> + self._auth_type_store = gtk.ListStore(str, str)
> + for auth_list in self._auth_lists:
> + self._auth_type_store.append([auth_list._auth_label,
> + auth_list._auth_type])
> +
> + self._auth_type_combo = gtk.ComboBox(self._auth_type_store)
> + cell = gtk.CellRendererText()
> + self._auth_type_combo.pack_start(cell, True)
> + self._auth_type_combo.add_attribute(cell, 'text', 0)
> + self._auth_type_combo.set_active(0)
> + self._auth_type_combo.connect('changed',
> + self._auth_type_combo_changed_cb)
> + self._auth_type_box = gtk.HBox(homogeneous=True)
> + self._auth_label = gtk.Label(_('Authentication'))
> + self._auth_type_box.pack_start(self._auth_label, expand=False)
> + self._auth_type_box.pack_start(self._auth_type_combo,
> + expand=False)
> + self.vbox.pack_start(self._auth_type_box)
> + self._auth_label.show()
> + self._auth_type_combo.show()
> +
> + self.add_buttons(gtk.STOCK_OK, gtk.RESPONSE_OK)
> + self.set_default_response(gtk.RESPONSE_OK)
> + self.set_has_separator(True)
> +
> + self.connect('response', self._fetch_values)
> +
> + auth_type = self._auth_lists[0]._auth_type
> + self._selected_auth_list = self._select_auth_list(auth_type)
> + self._add_key_value('eap', auth_type)
> + self._add_container_box()
> +
> + def _auth_type_combo_changed_cb(self, widget):
> + it = self._auth_type_combo.get_active_iter()
> + (auth_type, ) = self._auth_type_store.get(it, 1)
> + self._selected_auth_list = self._select_auth_list(auth_type)
> + self._add_key_value('eap', auth_type)
> + self._reset()
> +
> + def _select_auth_list(self, auth_type):
> + for auth_list in self._auth_lists:
> + if auth_list._params_list[0]._options[0][1] == auth_type:
> + return auth_list
> +
> + def _populate_auth_params(self, auth_list):
> + for auth_param in auth_list._params_list[1:]:
> + obj = NetworkParametersPOPO(auth_param)
> + self._key_values_box.pack_start(obj)
> + obj.show()
> +
> + def _reset(self):
> + self.vbox.remove(self._key_values_box)
> + self._add_container_box()
> +
> + def _add_container_box(self):
> + self._key_values_box = gtk.VBox()
> + self.vbox.pack_start(self._key_values_box)
> + self._key_values_box.show()
> + self._populate_auth_params(self._selected_auth_list)
> +
> + def _remove_all_params(self):
> + self._key_values_box.remove_all()
> +
> + def _fetch_values(self, key_dialog, response_id):
> + if response_id == gtk.RESPONSE_OK:
> + for child in self._key_values_box.get_children():
> + key = child._get_key()
> + value = child._get_value()
> + self._add_key_value(key, value)
> +
> + key_dialog.destroy()
> + self._final_callback(self._uuid, self._settings,
> + self._selected_auth_list)
> +
> + def _add_key_value(self, key, value):
> + for auth_param in self._selected_auth_list._params_list:
> + if auth_param._key_name == key:
> + if auth_param._key_type == SETTING_TYPE_STRING:
> + auth_param._value = value
> + elif auth_param._key_type == SETTING_TYPE_LIST:
> + values = []
> + values.append(value)
> + auth_param._value = values
> +
> +
> class WEPKeyDialog(KeyDialog):
> def __init__(self, ssid, flags, wpa_flags, rsn_flags, dev_caps,
> settings,
> response):
> @@ -218,7 +374,7 @@ class WEPKeyDialog(KeyDialog):
> self.set_response_sensitive(gtk.RESPONSE_OK, valid)
>
>
> -class WPAKeyDialog(KeyDialog):
> +class WPAPersonalKeyDialog(KeyDialog):
> def __init__(self, ssid, flags, wpa_flags, rsn_flags, dev_caps,
> settings,
> response):
> KeyDialog.__init__(self, ssid, flags, wpa_flags, rsn_flags,
> @@ -296,14 +452,26 @@ def create(ssid, flags, wpa_flags, rsn_flags,
> dev_caps, settings, response):
> rsn_flags == network.NM_802_11_AP_SEC_NONE:
> key_dialog = WEPKeyDialog(ssid, flags, wpa_flags, rsn_flags,
> dev_caps, settings, response)
> - else:
> - key_dialog = WPAKeyDialog(ssid, flags, wpa_flags, rsn_flags,
> + elif (wpa_flags & network.NM_802_11_AP_SEC_KEY_MGMT_PSK) or \
> + (rsn_flags & network.NM_802_11_AP_SEC_KEY_MGMT_PSK):
> + key_dialog = WPAPersonalKeyDialog(ssid, flags, wpa_flags,
> rsn_flags,
> dev_caps, settings, response)
> + elif (wpa_flags & network.NM_802_11_AP_SEC_KEY_MGMT_802_1X) or \
> + (rsn_flags & network.NM_802_11_AP_SEC_KEY_MGMT_802_1X):
> + # nothing. All details are asked for WPA/WPA2-Enterprise
> + # networks, before the conneection-activation is done.
> + pass
>
> key_dialog.connect('response', _key_dialog_response_cb)
> key_dialog.show_all()
>
>
> +def get_key_values(key_list, final_callback, uuid, settings):
> + key_dialog = KeyValuesDialog(key_list, final_callback,
> + uuid, settings)
> + key_dialog.show_all()
> +
> +
> def _key_dialog_response_cb(key_dialog, response_id):
> response = key_dialog.get_response_object()
> secrets = None
> diff --git a/src/jarabe/desktop/networkviews.py
> b/src/jarabe/desktop/networkviews.py
> index 2fb8593..738a142 100644
> --- a/src/jarabe/desktop/networkviews.py
> +++ b/src/jarabe/desktop/networkviews.py
> @@ -22,6 +22,7 @@ import hashlib
>
> import dbus
> import glib
> +import string
>
> from sugar.graphics.icon import Icon
> from sugar.graphics.xocolor import XoColor
> @@ -56,6 +57,189 @@ _OLPC_MESH_ICON_NAME = 'network-mesh'
>
> _FILTERED_ALPHA = 0.33
>
> +SETTING_TYPE_STRING = 1
> +SETTING_TYPE_LIST = 2
> +
> +
> +class AuthenticationType:
> + def __init__(self, auth_label, auth_type, params_list):
> + self._auth_label = auth_label
> + self._auth_type = auth_type
> + self._params_list = params_list
> +
> +
> +class AuthenticationParameter:
> + def __init__(self, key_name, key_label, key_type,
> + options):
> + self._key_name = key_name
> + self._key_label = key_label
> + self._key_type = key_type
> + self._options = options
> + self._value = None
> +
> +AUTHENTICATION_LIST = \
> + [
> + AuthenticationType('TLS',
> + 'tls',
> + [
> + AuthenticationParameter(
> + 'eap',
> + 'Authentication',
> + SETTING_TYPE_LIST,
> + [['TLS', 'tls']]
> + ),
> + AuthenticationParameter(
> + 'identity',
> + 'Identity',
> + SETTING_TYPE_STRING,
> + []
> + ),
> + AuthenticationParameter(
> + 'client_cert',
> + 'User certificate',
> + SETTING_TYPE_STRING,
> + []
> + ),
> + AuthenticationParameter(
> + 'ca_cert',
> + 'CA certificate',
> + SETTING_TYPE_STRING,
> + []
> + ),
> + AuthenticationParameter(
> + 'private_key',
> + 'Private key',
> + SETTING_TYPE_STRING,
> + []
> + ),
> + AuthenticationParameter(
> + 'private_key_password',
> + 'Private Key password',
> + SETTING_TYPE_STRING,
> + []
> + )
> + ]
> + ),
> + AuthenticationType('LEAP',
> + 'leap',
> + [
> + AuthenticationParameter(
> + 'eap',
> + 'Authentication',
> + SETTING_TYPE_LIST,
> + [['LEAP', 'leap']]
> + ),
> + AuthenticationParameter(
> + 'identity',
> + 'Username',
> + SETTING_TYPE_STRING,
> + []
> + ),
> + AuthenticationParameter(
> + 'password',
> + 'Password',
> + SETTING_TYPE_STRING,
> + []
> + )
> + ]
> + ),
> + AuthenticationType('Tunnelled TLS',
> + 'ttls',
> + [
> + AuthenticationParameter(
> + 'eap',
> + 'Authentication',
> + SETTING_TYPE_LIST,
> + [['Tunnelled TLS',
> 'ttls']]
> + ),
> + AuthenticationParameter(
> + 'anonymous_identity',
> + 'Anonymous identity',
> + SETTING_TYPE_STRING,
> + []
> + ),
> + AuthenticationParameter(
> + 'ca_cert',
> + 'CA certificate',
> + SETTING_TYPE_STRING,
> + []
> + ),
> + AuthenticationParameter(
> + 'phase2_auth',
> + 'Inner Authentication',
> + SETTING_TYPE_STRING,
> + [['PAP', 'pap'],
> + ['MSCHAP', 'mschap'],
> + ['MSCHAPv2',
> 'mschapv2'],
> + ['CHAP', 'chap']]
> + ),
> + AuthenticationParameter(
> + 'identity',
> + 'Username',
> + SETTING_TYPE_STRING,
> + []
> + ),
> + AuthenticationParameter(
> + 'password',
> + 'Password',
> + SETTING_TYPE_STRING,
> + []
> + )
> + ]
> + ),
> + AuthenticationType('Protected EAP (PEAP)',
> + 'peap',
> + [
> + AuthenticationParameter(
> + 'eap',
> + 'Authentication',
> + SETTING_TYPE_LIST,
> + [['Protected EAP
> (PEAP)', 'peap']]
> + ),
> + AuthenticationParameter(
> + 'anonymous_identity',
> + 'Anonymous identity',
> + SETTING_TYPE_STRING,
> + []
> + ),
> + AuthenticationParameter(
> + 'ca_cert',
> + 'CA certificate',
> + SETTING_TYPE_STRING,
> + []
> + ),
> + AuthenticationParameter(
> + 'peap_version',
> + 'PEAP version',
> + SETTING_TYPE_STRING,
> + [['Automatic', ''],
> + ['Version 0', '0'],
> + ['Version 1', '1']]
> + ),
> + AuthenticationParameter(
> + 'phase2_auth',
> + 'Inner Authentication',
> + SETTING_TYPE_STRING,
> + [['MSCHAPv2',
> 'mschapv2'],
> + ['MD5', 'md5'],
> + ['GTC', 'gtc']]
> + ),
> + AuthenticationParameter(
> + 'identity',
> + 'Username',
> + SETTING_TYPE_STRING,
> + []
> + ),
> + AuthenticationParameter(
> + 'password',
> + 'Password',
> + SETTING_TYPE_STRING,
> + []
> + )
> + ]
> + )
> + ]
> +
>
> class WirelessNetworkView(CanvasPulsingIcon):
> def __init__(self, initial_ap):
> @@ -340,6 +524,62 @@ class WirelessNetworkView(CanvasPulsingIcon):
> wireless_security.group = group
> return wireless_security
>
> + if (self._rsn_flags & network.NM_802_11_AP_SEC_KEY_MGMT_802_1X)
> and \
> + (self._device_caps & network.NM_802_11_DEVICE_CAP_RSN):
> + # WPA2 Enterprise
> + pairwise = self._add_ciphers_from_flags(self._rsn_flags, True)
> + group = self._add_ciphers_from_flags(self._rsn_flags, False)
> + wireless_security = WirelessSecurity()
> + wireless_security.key_mgmt = 'wpa-eap'
> + wireless_security.proto = 'rsn'
> + wireless_security.pairwise = pairwise
> + wireless_security.group = group
> + return wireless_security
> +
> + if (self._wpa_flags & network.NM_802_11_AP_SEC_KEY_MGMT_802_1X)
> and \
> + (self._device_caps & network.NM_802_11_DEVICE_CAP_WPA):
> + # WPA Enterprise
> + pairwise = self._add_ciphers_from_flags(self._wpa_flags, True)
> + group = self._add_ciphers_from_flags(self._wpa_flags, False)
> + wireless_security = WirelessSecurity()
> + wireless_security.key_mgmt = 'wpa-eap'
> + wireless_security.proto = 'wpa'
> + wireless_security.pairwise = pairwise
> + wireless_security.group = group
> + return wireless_security
> +
> + def _enter_additional_settings_and_secrets_and_then_activate(self,
> + uuid, settings, wireless_security):
> + # this is valid, only for "ieee8021x" or "wpa-eap" key
> + # management.
> + if (wireless_security.key_mgmt == 'ieee8021x') or \
> + (wireless_security.key_mgmt == 'wpa-eap'):
> + keydialog.get_key_values(AUTHENTICATION_LIST,
> + self.__add_and_activate_connection,
> + uuid, settings)
> + else:
> + self.__add_and_activate_connection(uuid, settings)
> +
> + def __add_and_activate_connection(self, uuid, settings,
> + additional_settings=None):
> +
> + if additional_settings is not None:
> + key_value_dict = {}
> + auth_params_list = additional_settings._params_list
> +
> + for auth_param in auth_params_list:
> + key = auth_param._key_name
> + value = auth_param._value
> + print 'key == ' + key
> + print 'value == '
> + print value
> + key_value_dict[key] = value
> +
> + settings.wpa_eap_setting = key_value_dict
> +
> + connection = network.add_connection(uuid, settings)
> + self._activate_connection(connection)
> +
> def __connect_activate_cb(self, icon):
> self._connect()
>
> @@ -350,8 +590,10 @@ class WirelessNetworkView(CanvasPulsingIcon):
> connection = network.find_connection_by_ssid(self._name)
> if connection is None:
> settings = Settings()
> + self._settings = settings
> settings.connection.id = 'Auto ' + self._name
> uuid = settings.connection.uuid = unique_id()
> + self._uuid = uuid
> settings.connection.type = '802-11-wireless'
> settings.wireless.ssid = self._name
>
> @@ -370,8 +612,12 @@ class WirelessNetworkView(CanvasPulsingIcon):
> if wireless_security is not None:
> settings.wireless.security = '802-11-wireless-security'
>
> - connection = network.add_connection(uuid, settings)
> +
> self._enter_additional_settings_and_secrets_and_then_activate(uuid,
> + settings, wireless_security)
> + else:
> + self._activate_connection(connection)
>
> + def _activate_connection(self, connection):
> obj = self._bus.get_object(_NM_SERVICE, _NM_PATH)
> netmgr = dbus.Interface(obj, _NM_IFACE)
>
> diff --git a/src/jarabe/model/network.py b/src/jarabe/model/network.py
> index f265ae4..2f8295e 100644
> --- a/src/jarabe/model/network.py
> +++ b/src/jarabe/model/network.py
> @@ -418,6 +418,7 @@ class Settings(object):
> self.connection = Connection()
> self.ip4_config = None
> self.wireless_security = None
> + self.wpa_eap_setting = None
>
> if wireless_cfg is not None:
> self.wireless = wireless_cfg
> @@ -433,6 +434,10 @@ class Settings(object):
> self.wireless_security.get_dict()
> if self.ip4_config is not None:
> settings['ipv4'] = self.ip4_config.get_dict()
> + if self.wpa_eap_setting is not None:
> + settings['802-1x'] = self.wpa_eap_setting
> +
> +
> return settings
>
>
> @@ -653,6 +658,9 @@ class NMSettingsConnection(dbus.service.Object):
> if self._settings.wireless.security is not None:
> config.set(identifier, 'security',
> self._settings.wireless.security)
> + if self._settings.wpa_eap_setting is not None:
> + config.set(identifier, 'wpa_eap_setting',
> + self._settings.wpa_eap_setting)
> if self._secrets is not None:
> if self._settings.wireless_security.key_mgmt == 'none':
> config.set(identifier, 'key', self._secrets.wep_key)
> @@ -895,13 +903,21 @@ def load_wifi_connections():
> settings.wireless_security.key_mgmt = mgmt
> security = config.get(section, 'security')
> settings.wireless.security = security
> - key = config.get(section, 'key')
> if mgmt == 'none':
> + key = config.get(section, 'key')
> secrets.wep_key = key
> auth_alg = config.get(section, 'auth-alg')
> secrets.auth_alg = auth_alg
> - elif mgmt == 'wpa-psk':
> - secrets.psk = key
> + elif (mgmt == 'wpa-psk') or (mgmt == 'wpa-eap'):
> + if mgmt == 'wpa-psk':
> + key = config.get(section, 'key')
> + secrets.psk = key
> + elif mgmt == 'wpa-eap':
> + if config.has_option(section,
> + 'wpa_eap_setting'):
> + value = eval(config.get(section,
> + 'wpa_eap_setting'))
> + settings.wpa_eap_setting = value
> if config.has_option(section, 'proto'):
> value = config.get(section, 'proto')
> settings.wireless_security.proto = value
> --
> 1.7.4.4
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sugarlabs.org/archive/sugar-devel/attachments/20111208/aafffb71/attachment-0001.html>
More information about the Sugar-devel
mailing list