[IAEP] Arduino and XO-1
Dr. Gerald Ardito
gerald.ardito at gmail.com
Thu Oct 4 23:36:29 EDT 2012
I have uploaded the newest version of Firmata to the Arduino board, and
still get the first error in your list.
Any thoughts about what I should do next?
On Thu, Oct 4, 2012 at 11:22 PM, Alan Jhonn Aguiar Schwyn <
alanjas at hotmail.com> wrote:
> The Arduino plugin have some checks. This checks are:
> 'ERROR: Check the Arduino and the number of port.'
> 'ERROR: Value must be a number from 0 to 255.'
> 'ERROR: Value must be either HIGH or LOW.'
> 'ERROR: The mode must be either INPUT, OUTPUT, PWM or SERVO.'
> The Arduino board needs have the Firmata firmware .
> The checks are catched with try/excepts that not allows see what is wrong.
> I can make a version without it to test..
>  http://firmata.org/wiki/Download
> From: gerald.ardito at gmail.com
> Date: Thu, 4 Oct 2012 23:09:03 -0400
> To: forster at ozonline.com.au; support-gang at laptop.org;
> iaep at lists.sugarlabs.org
> Subject: [IAEP] Arduino and XO-1
> I have been trying to get the Arduino to work with the XO-1 laptops.
> (Thanks to your great blog posts) I have successfully installed the
> Arduino IDE on the laptop, and it works great.
> Tonight, I installed the Arduino plugin for Turtle Art and (once again
> using your blog posts), created my first project. When I click "Start," I
> get an error: "Check the Arduino and the number of port."
> How do I do this with TurtleArt/outside the IDE?
> Thanks so much.
> _______________________________________________ IAEP -- It's An Education
> Project (not a laptop project!) IAEP at lists.sugarlabs.org
> IAEP -- It's An Education Project (not a laptop project!)
> IAEP at lists.sugarlabs.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the IAEP