[Dextrose] [PATCH v5][sucrose-0.94][RFC] Add capability to connect to WPA/WPA2-Enterprise Networks.

Ajay Garg ajay at activitycentral.com
Thu Dec 15 04:55:13 EST 2011


(Note that this is a consolidated patch, to be applied in full;
and NOT OVER version-4, version-3, version-2, and version-1 patches).

Enhancements/Fixes of current version (version-5), over version-4 ::
--------------------------------------------------------------------

a. Fixed the regression - Unable to connect to Unprotected-Wireless-Networks.
   Catcher :: Anish.





For the record.
----------------
Enhancements/Fixes of version-4, over version-3 ::
--------------------------------------------------

a. Fixing logging statements, and some formatting-changes (Thanks Sascha).
b. Not passing parameters to NetworkManager, that are not entered (required),
   as in TTLS- and PEAP-configuration (Thanks Anish).





For the record.
----------------
Enhancements/Fixes of version-3, over version-2 ::
--------------------------------------------------------------------

a. Now, TLS-based-authentication is also supported.
   -----------------------------------------------

   Thus, now, the following three authentication types are supported :
   (i)   TTLS
   (ii)  PEAP
   (iii) TLS

   Following authentication types are still not supported :
   (i)   LEAP (actually this may work, but the set-up has not been
               able to be worked out, and hence, this has not been
	       verified, even with nm-applet).

b. Journal-Chooser integration.
   ----------------------------

   This is useful in picking up chooser-entries (especially in case
   of certificates requirements, like in TLS and TTLS).





For the record.
----------------
Enhancements/Fixes of version-2, over version-1 ::
--------------------------------------------------

a. Network-Autoconnect-Upon-Hibernate-Resume
   ------------------------------------------

   Fixing the case, when network wouldn't (auto-)come-up,
   when the XO resumed from hibernation. (Thanks Anish for
   catching that :-) ).
   However, there wasn't a problem with auto-connect-on-reboot;
   it's working fine.

Signed-off-by: Ajay Garg <ajay at activitycentral.com>
---
 src/jarabe/desktop/keydialog.py     |  247 +++++++++++++++++++++++++++++++++-
 src/jarabe/desktop/networkviews.py  |  259 ++++++++++++++++++++++++++++++++++-
 src/jarabe/journal/objectchooser.py |   19 +++
 src/jarabe/model/network.py         |   28 +++-
 4 files changed, 541 insertions(+), 12 deletions(-)

diff --git a/src/jarabe/desktop/keydialog.py b/src/jarabe/desktop/keydialog.py
index c72f498..d8c8cf9 100644
--- a/src/jarabe/desktop/keydialog.py
+++ b/src/jarabe/desktop/keydialog.py
@@ -20,9 +20,13 @@ from gettext import gettext as _
 
 import gtk
 import dbus
+import os
+import shutil
 
+from sugar import env
 from jarabe.model import network
 from jarabe.model.network import Secrets
+from jarabe.journal.objectchooser import ObjectChooser
 
 
 IW_AUTH_ALG_OPEN_SYSTEM = 'open'
@@ -32,6 +36,11 @@ WEP_PASSPHRASE = 1
 WEP_HEX = 2
 WEP_ASCII = 3
 
+SETTING_TYPE_STRING = 1
+SETTING_TYPE_LIST = 2
+SETTING_TYPE_CHOOSER = 3
+
+
 
 def string_is_hex(key):
     is_hex = True
@@ -120,6 +129,226 @@ class KeyDialog(gtk.Dialog):
         return self._response
 
 
+class NetworkParameters(gtk.HBox):
+    def __init__(self, auth_param):
+        gtk.HBox.__init__(self, homogeneous=True)
+        self._key = auth_param._key_name
+        self._label = gtk.Label(_(auth_param._key_label))
+        self._key_type = auth_param._key_type
+        self._auth_param = auth_param
+
+        self.pack_start(self._label)
+        self._label.show()
+
+        if self._is_entry():
+            self._entry = gtk.Entry()
+            self.pack_start(self._entry)
+            self._entry.show()
+        elif self._is_liststore():
+            self._option_store = gtk.ListStore(str, str)
+            for option in auth_param._options:
+                self._option_store.append(option)
+
+            self._entry = auth_param._options[0][1]
+            self._option_combo = gtk.ComboBox(self._option_store)
+            cell = gtk.CellRendererText()
+            self._option_combo.pack_start(cell, True)
+            self._option_combo.add_attribute(cell, 'text', 0)
+            self._option_combo.set_active(0)
+            self._option_combo.connect('changed',
+                    self._option_combo_changed_cb)
+            self.pack_start(self._option_combo)
+            self.show()
+            self._option_combo.show()
+        elif self._is_chooser():
+            self._chooser_button = gtk.Button(_('Choose..'))
+            self._chooser_button.connect('clicked',
+                                          self._object_chooser_cb)
+            self.pack_start(self._chooser_button)
+            self._chooser_button.show()
+            self._entry = ''
+
+    def _is_entry(self):
+        return ( not self._is_chooser() ) and \
+               ( len(self._auth_param._options) == 0 )
+
+    def _is_liststore(self):
+        return ( not self._is_chooser() ) and \
+               ( len(self._auth_param._options) > 0 )
+
+    def _is_chooser(self):
+        return self._key_type == SETTING_TYPE_CHOOSER
+
+    def _object_chooser_cb(self, chooser_button):
+        self._want_document = True
+        self._show_picker_cb()
+
+    def _show_picker_cb(self):
+        if not self._want_document:
+            return
+        self._chooser = ObjectChooser()
+        self._chooser._set_callback(self.__process_selected_journal_object)
+
+        self._chooser.show()
+
+    def __process_selected_journal_object(self, object_id):
+        jobject = self._chooser.get_selected_object()
+        if jobject and jobject.file_path:
+            file_basename = \
+                    os.path.basename(jobject._metadata._properties['title'])
+            self._chooser_button.set_label(file_basename)
+
+
+
+            # The chooser entries are chosen from the journal.
+            # Now, the journal entries misbehave, and the entries keep
+            # changing their names. Thus, in order to have the same
+            # entry available at later times, we need to store the
+            # selected entries at a 'fixed-name' place.
+            #
+            # DISCOVERY-CUM-REQUIREMENT:
+            # -------------------------
+            #   It is needed that networks auto-connect on reboot; and
+            #   the user need not ne re-prompted to enter the
+            #   network-parameters.
+
+            profile_path = env.get_profile_path()
+            self._entry = os.path.join(profile_path, 'nm',
+                                       file_basename)
+
+            # Remove (older) file, if it exists.
+            if os.path.exists(self._entry):
+                os.remove(self._entry)
+
+            # Copy the file.
+            shutil.copy2(jobject.file_path, self._entry)
+
+        self._chooser.destroy()
+
+    def _option_combo_changed_cb(self, widget):
+        it = self._option_combo.get_active_iter()
+        (value, ) = self._option_store.get(it, 1)
+        self._entry = value
+
+    def _get_key(self):
+        return self._key
+
+    def _get_value(self):
+        if self._is_entry():
+            return self._entry.get_text()
+        elif self._is_liststore():
+            return self._entry
+        elif self._is_chooser():
+            if len(self._entry) > 0:
+                return dbus.ByteArray('file://' + self._entry + '\0')
+            else:
+                return self._entry
+
+
+class KeyValuesDialog(gtk.Dialog):
+    def __init__(self, auth_lists, final_callback, uuid, settings):
+        # This must not be "modal", else the "chooser" widgets won't
+        # accept anything !!
+        gtk.Dialog.__init__(self)
+        self.set_title(_('Wireless Parameters required'))
+
+        self._spacing_between_children_widgets = 5
+        self._auth_lists = auth_lists
+        self._final_callback = final_callback
+        self._uuid = uuid
+        self._settings = settings
+
+        label = gtk.Label(_("Please enter parameters\n"))
+        self.vbox.set_spacing(self._spacing_between_children_widgets)
+        self.vbox.pack_start(label)
+
+        self._auth_type_store = gtk.ListStore(str, str)
+        for auth_list in self._auth_lists:
+            self._auth_type_store.append([auth_list._auth_label,
+                                          auth_list._auth_type])
+
+        self._auth_type_combo = gtk.ComboBox(self._auth_type_store)
+        cell = gtk.CellRendererText()
+        self._auth_type_combo.pack_start(cell, True)
+        self._auth_type_combo.add_attribute(cell, 'text', 0)
+        self._auth_type_combo.set_active(0)
+        self._auth_type_combo.connect('changed',
+                self._auth_type_combo_changed_cb)
+        self._auth_type_box = gtk.HBox(homogeneous=True)
+        self._auth_label = gtk.Label(_('Authentication'))
+        self._auth_type_box.pack_start(self._auth_label, expand=False)
+        self._auth_type_box.pack_start(self._auth_type_combo,
+                                       expand=False)
+        self.vbox.pack_start(self._auth_type_box)
+        self._auth_label.show()
+        self._auth_type_combo.show()
+
+        self.add_buttons(gtk.STOCK_OK, gtk.RESPONSE_OK)
+        self.set_default_response(gtk.RESPONSE_OK)
+        self.set_has_separator(True)
+
+        self.connect('response', self._fetch_values)
+
+        auth_type = self._auth_lists[0]._auth_type
+        self._selected_auth_list = self._select_auth_list(auth_type)
+        self._add_key_value('eap', auth_type)
+        self._add_container_box()
+
+    def _auth_type_combo_changed_cb(self, widget):
+        it = self._auth_type_combo.get_active_iter()
+        (auth_type, ) = self._auth_type_store.get(it, 1)
+        self._selected_auth_list = self._select_auth_list(auth_type)
+        self._add_key_value('eap', auth_type)
+        self._reset()
+
+    def _select_auth_list(self, auth_type):
+        for auth_list in self._auth_lists:
+            if auth_list._params_list[0]._options[0][1] == auth_type:
+                return auth_list
+
+    def _populate_auth_params(self, auth_list):
+        for auth_param in auth_list._params_list[1:]:
+            obj = NetworkParameters(auth_param)
+            self._key_values_box.pack_start(obj)
+            obj.show()
+
+    def _reset(self):
+        self.vbox.remove(self._key_values_box)
+        self._add_container_box()
+
+    def _add_container_box(self):
+        self._key_values_box = \
+                gtk.VBox(spacing=self._spacing_between_children_widgets)
+        self.vbox.pack_start(self._key_values_box)
+        self._key_values_box.show()
+        self._populate_auth_params(self._selected_auth_list)
+
+    def _remove_all_params(self):
+        self._key_values_box.remove_all()
+
+    def _fetch_values(self, key_dialog, response_id):
+        if response_id == gtk.RESPONSE_OK:
+            for child in self._key_values_box.get_children():
+                key = child._get_key()
+                value = child._get_value()
+                self._add_key_value(key, value)
+
+            key_dialog.destroy()
+            self._final_callback(self._uuid, self._settings,
+                                 self._selected_auth_list)
+
+    def _add_key_value(self, key, value):
+        for auth_param in self._selected_auth_list._params_list:
+            if auth_param._key_name == key:
+                if (auth_param._key_type == SETTING_TYPE_STRING) or \
+                   (auth_param._key_type == SETTING_TYPE_CHOOSER):
+                    auth_param._value = value
+                elif auth_param._key_type == SETTING_TYPE_LIST:
+                    values = []
+                    values.append(value)
+                    auth_param._value = values
+
+
 class WEPKeyDialog(KeyDialog):
     def __init__(self, ssid, flags, wpa_flags, rsn_flags, dev_caps, settings,
                  response):
@@ -218,7 +447,7 @@ class WEPKeyDialog(KeyDialog):
         self.set_response_sensitive(gtk.RESPONSE_OK, valid)
 
 
-class WPAKeyDialog(KeyDialog):
+class WPAPersonalKeyDialog(KeyDialog):
     def __init__(self, ssid, flags, wpa_flags, rsn_flags, dev_caps, settings,
                  response):
         KeyDialog.__init__(self, ssid, flags, wpa_flags, rsn_flags,
@@ -296,14 +525,26 @@ def create(ssid, flags, wpa_flags, rsn_flags, dev_caps, settings, response):
             rsn_flags == network.NM_802_11_AP_SEC_NONE:
         key_dialog = WEPKeyDialog(ssid, flags, wpa_flags, rsn_flags,
                                   dev_caps, settings, response)
-    else:
-        key_dialog = WPAKeyDialog(ssid, flags, wpa_flags, rsn_flags,
+    elif (wpa_flags & network.NM_802_11_AP_SEC_KEY_MGMT_PSK) or \
+            (rsn_flags & network.NM_802_11_AP_SEC_KEY_MGMT_PSK):
+        key_dialog = WPAPersonalKeyDialog(ssid, flags, wpa_flags, rsn_flags,
                                   dev_caps, settings, response)
+    elif (wpa_flags & network.NM_802_11_AP_SEC_KEY_MGMT_802_1X) or \
+            (rsn_flags & network.NM_802_11_AP_SEC_KEY_MGMT_802_1X):
+        # nothing. All details are asked for WPA/WPA2-Enterprise
+        # networks, before the conneection-activation is done.
+        return
 
     key_dialog.connect('response', _key_dialog_response_cb)
     key_dialog.show_all()
 
 
+def get_key_values(key_list, final_callback, uuid, settings):
+    key_dialog = KeyValuesDialog(key_list, final_callback,
+                                 uuid, settings)
+    key_dialog.show_all()
+
+
 def _key_dialog_response_cb(key_dialog, response_id):
     response = key_dialog.get_response_object()
     secrets = None
diff --git a/src/jarabe/desktop/networkviews.py b/src/jarabe/desktop/networkviews.py
index 2fb8593..d36aeb3 100644
--- a/src/jarabe/desktop/networkviews.py
+++ b/src/jarabe/desktop/networkviews.py
@@ -22,6 +22,7 @@ import hashlib
 
 import dbus
 import glib
+import string
 
 from sugar.graphics.icon import Icon
 from sugar.graphics.xocolor import XoColor
@@ -56,6 +57,192 @@ _OLPC_MESH_ICON_NAME = 'network-mesh'
 
 _FILTERED_ALPHA = 0.33
 
+SETTING_TYPE_STRING = 1
+SETTING_TYPE_LIST = 2
+SETTING_TYPE_CHOOSER = 3
+
+
+class AuthenticationType:
+    def __init__(self, auth_label, auth_type, params_list):
+        self._auth_label = auth_label
+        self._auth_type = auth_type
+        self._params_list = params_list
+
+
+class AuthenticationParameter:
+    def __init__(self, key_name, key_label, key_type,
+                       options):
+        self._key_name = key_name
+        self._key_label = key_label
+        self._key_type = key_type
+        self._options = options
+        self._value = None
+
+
+
+AUTHENTICATION_LIST = \
+        [
+          AuthenticationType('TLS',
+                             'tls',
+                               [
+                                 AuthenticationParameter(
+                                 'eap',
+                                 'Authentication',
+                                  SETTING_TYPE_LIST,
+                                  [['TLS', 'tls']]
+                                  ),
+                                  AuthenticationParameter(
+                                  'identity',
+                                  'Identity',
+                                  SETTING_TYPE_STRING,
+                                  []
+                                  ),
+                                  AuthenticationParameter(
+                                  'client-cert',
+                                  'User certificate',
+                                  SETTING_TYPE_CHOOSER,
+                                  []
+                                  ),
+                                  AuthenticationParameter(
+                                  'ca-cert',
+                                  'CA certificate',
+                                  SETTING_TYPE_CHOOSER,
+                                  []
+                                  ),
+                                  AuthenticationParameter(
+                                  'private-key',
+                                  'Private key',
+                                  SETTING_TYPE_CHOOSER,
+                                  []
+                                  ),
+                                  AuthenticationParameter(
+                                  'private-key-password',
+                                  'Private Key password',
+                                  SETTING_TYPE_STRING,
+                                  []
+                                  )
+                                ]
+                            ),
+          AuthenticationType('LEAP',
+                             'leap',
+                                [
+                                   AuthenticationParameter(
+                                   'eap',
+                                   'Authentication',
+                                   SETTING_TYPE_LIST,
+                                   [['LEAP', 'leap']]
+                                   ),
+                                   AuthenticationParameter(
+                                   'identity',
+                                   'Username',
+                                   SETTING_TYPE_STRING,
+                                   []
+                                   ),
+                                   AuthenticationParameter(
+                                   'password',
+                                   'Password',
+                                   SETTING_TYPE_STRING,
+                                   []
+                                   )
+                                 ]
+                             ),
+           AuthenticationType('Tunnelled TLS',
+                              'ttls',
+                                 [
+                                    AuthenticationParameter(
+                                    'eap',
+                                    'Authentication',
+                                    SETTING_TYPE_LIST,
+                                    [['Tunnelled TLS', 'ttls']]
+                                    ),
+                                    AuthenticationParameter(
+                                    'anonymous-identity',
+                                    'Anonymous identity',
+                                    SETTING_TYPE_STRING,
+                                    []
+                                    ),
+                                    AuthenticationParameter(
+                                    'ca-cert',
+                                    'CA certificate',
+                                    SETTING_TYPE_CHOOSER,
+                                    []
+                                    ),
+                                    AuthenticationParameter(
+                                    'phase2-auth',
+                                    'Inner Authentication',
+                                    SETTING_TYPE_STRING,
+                                    [['PAP', 'pap'],
+                                    ['MSCHAP', 'mschap'],
+                                    ['MSCHAPv2', 'mschapv2'],
+                                    ['CHAP', 'chap']]
+                                    ),
+                                    AuthenticationParameter(
+                                    'identity',
+                                    'Username',
+                                    SETTING_TYPE_STRING,
+                                    []
+                                    ),
+                                    AuthenticationParameter(
+                                    'password',
+                                    'Password',
+                                    SETTING_TYPE_STRING,
+                                    []
+                                    )
+                                ]
+                            ),
+          AuthenticationType('Protected EAP (PEAP)',
+                             'peap',
+                                [
+                                    AuthenticationParameter(
+                                    'eap',
+                                    'Authentication',
+                                    SETTING_TYPE_LIST,
+                                    [['Protected EAP (PEAP)', 'peap']]
+                                    ),
+                                    AuthenticationParameter(
+                                    'anonymous-identity',
+                                    'Anonymous identity',
+                                    SETTING_TYPE_STRING,
+                                    []
+                                    ),
+                                    AuthenticationParameter(
+                                    'ca-cert',
+                                    'CA certificate',
+                                    SETTING_TYPE_CHOOSER,
+                                    []
+                                    ),
+                                    AuthenticationParameter(
+                                    'phase1-peapver',
+                                    'PEAP version',
+                                    SETTING_TYPE_STRING,
+                                    [['Automatic', ''],
+                                    ['Version 0', '0'],
+                                    ['Version 1', '1']]
+                                    ),
+                                    AuthenticationParameter(
+                                    'phase2-auth',
+                                    'Inner Authentication',
+                                    SETTING_TYPE_STRING,
+                                    [['MSCHAPv2', 'mschapv2'],
+                                    ['MD5', 'md5'],
+                                    ['GTC', 'gtc']]
+                                    ),
+                                    AuthenticationParameter(
+                                    'identity',
+                                    'Username',
+                                    SETTING_TYPE_STRING,
+                                    []
+                                    ),
+                                    AuthenticationParameter(
+                                    'password',
+                                    'Password',
+                                    SETTING_TYPE_STRING,
+                                    []
+                                    )
+                                 ]
+                            )
+             ]
+
 
 class WirelessNetworkView(CanvasPulsingIcon):
     def __init__(self, initial_ap):
@@ -323,7 +510,7 @@ class WirelessNetworkView(CanvasPulsingIcon):
             group = self._add_ciphers_from_flags(self._rsn_flags, False)
             wireless_security = WirelessSecurity()
             wireless_security.key_mgmt = 'wpa-psk'
-            wireless_security.proto = 'rsn'
+            wireless_security.proto = ['rsn']
             wireless_security.pairwise = pairwise
             wireless_security.group = group
             return wireless_security
@@ -335,11 +522,71 @@ class WirelessNetworkView(CanvasPulsingIcon):
             group = self._add_ciphers_from_flags(self._wpa_flags, False)
             wireless_security = WirelessSecurity()
             wireless_security.key_mgmt = 'wpa-psk'
-            wireless_security.proto = 'wpa'
+            wireless_security.proto = ['wpa']
             wireless_security.pairwise = pairwise
             wireless_security.group = group
             return wireless_security
 
+        if (self._rsn_flags & network.NM_802_11_AP_SEC_KEY_MGMT_802_1X) and \
+                (self._device_caps & network.NM_802_11_DEVICE_CAP_RSN):
+            # WPA2 Enterprise
+            pairwise = self._add_ciphers_from_flags(self._rsn_flags, True)
+            group = self._add_ciphers_from_flags(self._rsn_flags, False)
+            wireless_security = WirelessSecurity()
+            wireless_security.key_mgmt = 'wpa-eap'
+            wireless_security.proto = ['rsn']
+            wireless_security.pairwise = pairwise
+            wireless_security.group = group
+            return wireless_security
+
+        if (self._wpa_flags & network.NM_802_11_AP_SEC_KEY_MGMT_802_1X) and \
+                (self._device_caps & network.NM_802_11_DEVICE_CAP_WPA):
+            # WPA Enterprise
+            pairwise = self._add_ciphers_from_flags(self._wpa_flags, True)
+            group = self._add_ciphers_from_flags(self._wpa_flags, False)
+            wireless_security = WirelessSecurity()
+            wireless_security.key_mgmt = 'wpa-eap'
+            wireless_security.proto = ['wpa']
+            wireless_security.pairwise = pairwise
+            wireless_security.group = group
+            return wireless_security
+
+    def _enter_additional_settings_and_secrets_and_then_activate(self,
+            uuid, settings, wireless_security):
+        # this is valid, only for "ieee8021x" or "wpa-eap" key
+        # management (provided the network has ANY security at all)
+        if (wireless_security is not None) and \
+                ( (wireless_security.key_mgmt == 'ieee8021x') or \
+                  (wireless_security.key_mgmt == 'wpa-eap') ):
+            keydialog.get_key_values(AUTHENTICATION_LIST,
+                                     self.__add_and_activate_connection,
+                                     uuid, settings)
+        else:
+            self.__add_and_activate_connection(uuid, settings)
+
+    def __add_and_activate_connection(self, uuid, settings,
+                                      additional_settings=None):
+
+        if additional_settings is not None:
+            key_value_dict = {}
+            auth_params_list = additional_settings._params_list
+
+            for auth_param in auth_params_list:
+                key = auth_param._key_name
+                value = auth_param._value
+                logging.debug('key == %s', key)
+                logging.debug('value == %s', value)
+                if len(value) > 0:
+                    key_value_dict[key] = value
+                else:
+                    logging.debug('Not setting empty value for key :'
+                    ' %s', key)
+
+            settings.wpa_eap_setting = key_value_dict
+
+        connection = network.add_connection(uuid, settings)
+        self._activate_connection(connection)
+
     def __connect_activate_cb(self, icon):
         self._connect()
 
@@ -350,8 +597,10 @@ class WirelessNetworkView(CanvasPulsingIcon):
         connection = network.find_connection_by_ssid(self._name)
         if connection is None:
             settings = Settings()
+            self._settings = settings
             settings.connection.id = 'Auto ' + self._name
             uuid = settings.connection.uuid = unique_id()
+            self._uuid = uuid
             settings.connection.type = '802-11-wireless'
             settings.wireless.ssid = self._name
 
@@ -370,8 +619,12 @@ class WirelessNetworkView(CanvasPulsingIcon):
             if wireless_security is not None:
                 settings.wireless.security = '802-11-wireless-security'
 
-            connection = network.add_connection(uuid, settings)
+            self._enter_additional_settings_and_secrets_and_then_activate(uuid,
+                    settings, wireless_security)
+        else:
+            self._activate_connection(connection)
 
+    def _activate_connection(self, connection):
         obj = self._bus.get_object(_NM_SERVICE, _NM_PATH)
         netmgr = dbus.Interface(obj, _NM_IFACE)
 
diff --git a/src/jarabe/journal/objectchooser.py b/src/jarabe/journal/objectchooser.py
index ecb8ecf..59df14b 100644
--- a/src/jarabe/journal/objectchooser.py
+++ b/src/jarabe/journal/objectchooser.py
@@ -20,9 +20,12 @@ import logging
 import gobject
 import gtk
 import wnck
+import os
 
+from sugar import env
 from sugar.graphics import style
 from sugar.graphics.toolbutton import ToolButton
+from sugar.datastore import datastore
 
 from jarabe.journal.listview import BaseListView
 from jarabe.journal.listmodel import ListModel
@@ -46,6 +49,7 @@ class ObjectChooser(gtk.Window):
         self.set_border_width(style.LINE_WIDTH)
 
         self._selected_object_id = None
+        self._callback = None
 
         self.add_events(gtk.gdk.VISIBILITY_NOTIFY_MASK)
         self.connect('visibility-notify-event',
@@ -109,6 +113,15 @@ class ObjectChooser(gtk.Window):
         self._selected_object_id = uid
         self.emit('response', gtk.RESPONSE_ACCEPT)
 
+        if self._callback is not None:
+            self._callback(self._selected_object_id)
+
+    def get_selected_object(self):
+        if self._selected_object_id is None:
+            return None
+        else:
+            return datastore.get(self._selected_object_id)
+
     def __delete_event_cb(self, chooser, event):
         self.emit('response', gtk.RESPONSE_DELETE_EVENT)
 
@@ -120,6 +133,9 @@ class ObjectChooser(gtk.Window):
     def __close_button_clicked_cb(self, button):
         self.emit('response', gtk.RESPONSE_DELETE_EVENT)
 
+        if self._callback is not None:
+            self._callback(self._selected_object_id)
+
     def get_selected_object_id(self):
         return self._selected_object_id
 
@@ -135,6 +151,9 @@ class ObjectChooser(gtk.Window):
         visible = event.state == gtk.gdk.VISIBILITY_FULLY_OBSCURED
         self._list_view.set_is_visible(visible)
 
+    def _set_callback(self, callback):
+        self._callback = callback
+
 
 class TitleBox(VolumesToolbar):
     __gtype_name__ = 'TitleBox'
diff --git a/src/jarabe/model/network.py b/src/jarabe/model/network.py
index f265ae4..84e3666 100644
--- a/src/jarabe/model/network.py
+++ b/src/jarabe/model/network.py
@@ -418,6 +418,7 @@ class Settings(object):
         self.connection = Connection()
         self.ip4_config = None
         self.wireless_security = None
+        self.wpa_eap_setting = None
 
         if wireless_cfg is not None:
             self.wireless = wireless_cfg
@@ -433,6 +434,10 @@ class Settings(object):
                 self.wireless_security.get_dict()
         if self.ip4_config is not None:
             settings['ipv4'] = self.ip4_config.get_dict()
+        if self.wpa_eap_setting is not None:
+            settings['802-1x'] = self.wpa_eap_setting
+
+
         return settings
 
 
@@ -653,6 +658,9 @@ class NMSettingsConnection(dbus.service.Object):
                 if self._settings.wireless.security is not None:
                     config.set(identifier, 'security',
                                self._settings.wireless.security)
+                if self._settings.wpa_eap_setting is not None:
+                    config.set(identifier, 'wpa_eap_setting',
+                               self._settings.wpa_eap_setting)
             if self._secrets is not None:
                 if self._settings.wireless_security.key_mgmt == 'none':
                     config.set(identifier, 'key', self._secrets.wep_key)
@@ -895,21 +903,29 @@ def load_wifi_connections():
                 settings.wireless_security.key_mgmt = mgmt
                 security = config.get(section, 'security')
                 settings.wireless.security = security
-                key = config.get(section, 'key')
                 if mgmt == 'none':
+                    key = config.get(section, 'key')
                     secrets.wep_key = key
                     auth_alg = config.get(section, 'auth-alg')
                     secrets.auth_alg = auth_alg
-                elif mgmt == 'wpa-psk':
-                    secrets.psk = key
+                elif (mgmt == 'wpa-psk') or (mgmt == 'wpa-eap'):
+                    if mgmt == 'wpa-psk':
+                        key = config.get(section, 'key')
+                        secrets.psk = key
+                    elif mgmt == 'wpa-eap':
+                        if config.has_option(section,
+                                             'wpa_eap_setting'):
+                            value = eval(config.get(section,
+                                               'wpa_eap_setting'))
+                            settings.wpa_eap_setting = value
                     if config.has_option(section, 'proto'):
-                        value = config.get(section, 'proto')
+                        value = eval(config.get(section, 'proto'))
                         settings.wireless_security.proto = value
                     if config.has_option(section, 'group'):
-                        value = config.get(section, 'group')
+                        value = eval(config.get(section, 'group'))
                         settings.wireless_security.group = value
                     if config.has_option(section, 'pairwise'):
-                        value = config.get(section, 'pairwise')
+                        value = eval(config.get(section, 'pairwise'))
                         settings.wireless_security.pairwise = value
         except ConfigParser.Error:
             logging.exception('Error reading section')
-- 
1.7.4.4



More information about the Dextrose mailing list